NordicTrack T 5.3 Treadmill English Manual - Page 8

Hold the Right Upright 85 against the Base

Page 8 highlights

3. Identify the Right Upright (85), which is marked 3 with a "Right" sticker. Hold the Right Upright near the Base (95) as shown. 85 See the inset drawing. Tie the wire tie in the Right Upright (85) securely around the end of the Upright Wire (87). Then, pull the other end of the wire tie until the Upright Wire is routed 87 Wire Tie 87 completely through the Right Upright. 95 85 87 4. Hold the Right Upright (85) against the Base (95). Be careful not to pinch the Upright Wire 4 (87). Insert two 3/8" x 4" Bolts (7) and a 3/8" x 1 1/2" Bolt (3) with three 3/8" Star Washers (11) into the Right Upright. Partially tighten the 3/8" x 4" Patch Bolts (7) until the heads of the Patch Bolts touch the Right Upright (85); do not fully tighten the Patch Bolts yet. Partially tighten the 3/8" x 1 1/2" Bolt (3). Wire Tie 85 3 11 7 11 87 95 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8
4.
Hold the Right Upright (85) against the Base
(95).
Be careful not to pinch the Upright Wire
(87).
Insert two 3/8" x 4" Bolts (7) and a 3/8" x
1 1/2" Bolt (3) with three 3/8" Star Washers (11)
into the Right Upright.
Partially tighten the 3/8" x 4" Patch Bolts (7) until
the heads of the Patch Bolts touch the Right
Upright (85);
do not fully tighten the Patch
Bolts yet.
Partially tighten the 3/8" x 1 1/2" Bolt
(3).
95
85
87
11
11
3
7
4
3.
Identify the Right Upright (85), which is marked
with a “Right” sticker. Hold the Right Upright
near the Base (95) as shown.
See the inset drawing.
Tie the wire tie in the
Right Upright (85) securely around the end of
the Upright Wire (87). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
Wire Tie
87
85
95
87
3
Wire
Tie
85
87