NordicTrack T16 Uk Manual - Page 12
If You Do Not Connect The Con
View all NordicTrack T16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. W ith the help of a second person, hold the console assembly near the left Handrail (86) and the 11 right Handrail (not shown). Connect the ground wire from the console assembly to the Console Ground Wire (105) on the Pulse Crossbar (93). Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. If YOU DO NOT CONNECT the connectors properly, the console may become damaged when you turn on the power. Then, remove the wire tie from the Upright Wire. Console Assembly Ground Wire 105 81 Console Wire 81 93 Wire Tie Console Wire 86 12. S et the console assembly on the brackets on the Handrails (86). Make sure that no wires are 12 pinched. Insert the excess Upright Wire (81) behind the Console Frame (104). Attach the console assembly to the brackets on the Handrails (86) with the four 5/16" x 3/4" Screws (4) you removed in step 8 and four 5/16" Star Washers (11). Start all four Screws, but do not tighten them yet. 86 11 4 Console Assembly 104 81 86 11 4 12