NordicTrack T17.2 Uk Manual - Page 12
Be careful not to pinch any, wires., Start all four, Screws and then tighten them.
![]() |
View all NordicTrack T17.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Remove the two #8 x 1 1/4" Screws (107) and slide the Right Handrail Cover (80) back about 1 in. The Screws will be reattached in a later step. Note: It is not necessary to move the Right Handrail Insert (85). With the help of a second person, hold the console assembly near the right handrail assembly (C). Make sure that the pulse wire (E) is inserted through the looped Cable Tie (99) on the right handrail assembly (C). Route the pulse wire (E) around the back of the console assembly as shown, and insert the end of the wire through the other Cable Tie (99). 11 Console Assembly E C 99 85 99 E 80 107 12. Set the console assembly on the brackets on the Handrails (87). Be careful not to pinch any 12 wires. Attach the console assembly with the four 1/4" x 1/2" Screws (4) that you removed in step 9 and four 1/4" Star Washers (5). Start all four 87 Screws and then tighten them. 5 4 Console Assembly 87 5 4 12
![](/manual_guide/products/nordictrack-t-172-treadmill-uk-manual-5925f48/12.png)