NordicTrack Vgr910 English Manual - Page 11
Maintenance And Troubleshooting, Warning
View all NordicTrack Vgr910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
When your pulse is detected, the heart-shaped indicator in the left display will begin to flash, one to three dashes will appear, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. Note: If your heart rate is not shown, make sure that your hands are positioned as described above. Be careful not to move your hands excessively or squeeze the metal contacts too tightly. 5. To turn off the power, simply wait for about four minutes. Note: The console has an "auto-off" feature. If the pedals are not moved and the console button is not pressed for four minutes, the power will turn off automatically in order to conserve the batteries. WARNING: The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately. For smooth operation of the elliptical crosstrainer, the incline frame should be kept clean. Incline Frame Using a soft cloth and mild Wheel detergent, clean dust and other residue from the incline frame where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents. To prevent damage to the console, keep liquids away from the console. Always remove the batteries from the console when storing the elliptical crosstrainer. LUBRICATING THE INCLINE BRACKET The incline bracket and the bolt on which it pivots should be Bolt regularly lubri- cated. Apply a small amount of the included lubricant to the bolt and between the bracket and the upright. Upright Incline Bracket BATTERY REPLACEMENT If the console does not function properly, the batteries should be replaced. Refer to assembly step 5 on page 6 for instructions. Note: It is not necessary to remove the console in order to replace the batteries. 11