NordicTrack Vx 650 Uk Manual - Page 9

7. While a second person holds the Handlebar (3) near the Handlebar Post (16), route the Upper Wire (7) upward through the Handlebar as shown. Tip: Avoid pinching the Upper Wire (7). Attach the Handlebar (3) to the Handlebar Post (16) with two M10 Bolt Sets (12) and two Small Wave Washers (14). 7 12 3 7 Avoid pinching the Upper Wire (7) 14 12 16 8. While a second person holds the Console (1) near the Handlebar Post (16), plug the Upper Wire (7) and the Pulse Wire (4) into the receptacles on the Console. 8 1 The connectors on the Upper Wire (7) and the Pulse Wire (4) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the Console (1) may become damaged when you use the exercise bike. 7 4 16 8 Insert the excess wires into the Handlebar Post (16). Tip: Avoid pinching the wires. Attach the Console (1) to the Handlebar Post (16) with four M4 x 16mm Screws (8); start all the Screws, and then tighten them. Avoid pinching the wires 9