NordicTrack X32i Instruction Manual - Page 11

8. With the help of a second person, position the handrail assembly (E) below the Console (93) 8 as shown. Then, move both sides of the hand- rail assembly upward at the same time, sliding the inner corner (F) of the handrail assembly between the Console (93) and the Console Base (92). Next, attach the handrail assembly (E) with four 3/8" x 5 1/2" Screws (1) and four 3/8" Star Washers (3) (only one side is shown); start all four Screws, and then tighten them. Then, tighten the four 5/16" x 3/4" Patch Screws (108) (only one side is shown). F 108 E 92 3 1 93 3 9. Slide the Right Inside Upright Cover (70) against the lower end of the right Upright (83). Then, press the Right Outside Upright Cover (71) against the Right Inside Upright Cover until it snaps into place. Make sure that the wires (G) are not pinched. 9 70 83 Attach the Left Inside Upright Cover (not shown) and the Left Outside Upright Cover (not shown) as described above. Note: There are no wires on the left side. G 71 11