Oki B4350n Guide: Software Installation B4350, B4350n (American English) - Page 5
Network Printer Installation: Windows - b4350 driver
View all Oki B4350n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Network Printer Installation: Windows INSTALL THE PRINTER DRIVER NOTE The B4350n printer is network-ready. To network the B4350 printer, the optional OkiLAN 8100e Internal Printer Server (PN 70049701), or 6020e External Print Server (PN 70036001) must be installed. NOTE For additional information, install the Network User's Guide located on the CD-ROM. Run the Menu Installer, then click the Documentation/Network User's Guide buttons. Before beginning the installation: • If you are not using DHCP, you need to obtain an IP Address from your network Administrator and enter it using the front panel: • Press Menu until you see NETWORK on the display, then press SELECT. • Press ITEM until you see IP ADDR. on the display, then press SELECT. • Press VALUE to change the setting to MANUAL, and press SELECT. • Press ITEM+ to advance to the IP ADDRESS display, then press SELECT. • Use the VALUE+ and - to set each set of three digits in the IP Address. • Press SELECT to engage the IP Address, then press ON LINE. 2. The License Agreement appears. Click Next if you agree. 3. Select the language. 4. Select the printer model. Click Continue. 5. Click the Printer Driver Installer button. 6. Select Network Printer. Click Next. 7. Shared printer type displays. Follow the on-screen instructions to complete the installation. For additional information, see the OkiLAN 8100e Network User's Guide located on the CD. NOTE In order to send documents to the printer, the LPR utility must be installed. This utility installs automatically when the drivers are installed from the Installation CD using the Menu Installer as instructed here. If drivers are installed using Windows Add Printer Wizard, you need to load the LPR Utility from the Menu Installer -click the Network Install button, click Installation/Config/OKI LPR. Driver Installation: 1. Insert the CD into your CD-ROM drive. The CD will autorun. (If it doesn't, click Start→Run→Browse. Browse to your CD-ROM drive and double-click Install.exe, click OK.) 5