Oki B6300 OKI B6200 & B6300 Warranty, Regulatory, and Safety Information: - Page 4
Safety Information - parts
View all Oki B6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safety Information Your Oki printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer. • Carefully read the provided setup and operating instructions. • Save all provided documentation for future reference. • Read and follow all warning and instruction labels on the printer itself. • Unplug the printer before you clean it. Use only a damp cloth; do not use liquid or aerosol cleaners. • Place your printer on a firm, solid surface. If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as a rug, sofa, or cushion, the vents may be blocked, causing the printer to overheat. • Protect your printer from overheating. Make sure no obstructions block the openings of the printer. Do not put the printer on or near a heat source (such as a radiator or heat register). Keep the printer out of direct sunlight. Allow enough room around the printer for adequate ventilation and easy access to the paper trays. If you put the printer in any kind of enclosure, make sure the enclosure is properly ventilated. • Do not use your printer near water. Do not spill liquid of any kind into it. • Be certain that your power source matches the rating listed on the back of the printer. If you are not sure, check with your dealer or with your local power company. • Your printer has a grounded, three-prong plug as a safety feature. This plug only fits into a grounded outlet. If the plug does not fit, the outlet may be an older, non-grounded type. Contact an electrician to have the outlet replaced. Do not use an adapter to defeat the grounding. • Install the printer near an easily accessed power outlet. • Avoid damaging the power cord. Do not put anything on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately. • If you are using an extension cord or power strip with the printer, make sure that the total of the amperes required by all the equipment on the extension is less than the extension's rating. The total ratings of all equipment plugged into the outlet should not exceed 15 amperes. • Do not poke anything into the ventilation slots of the printer. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire. • Aside from the routine maintenance described in the documentation, do not try to service the printer yourself. Removing the cover may expose you to shocks or other hazards. • Do not make any adjustments other than those outlined in the documentation. You may cause damage that will require extensive repair work. The provided documentation explains how to get your printer serviced by qualified Oki Data technicians. If anything happens that indicates that your printer is not working properly or has been damaged, unplug it immediately and follow the procedures in the provided documentation for having your printer serviced. Here are some of the things to look for: - The power cord or plug is frayed or damaged. - Liquid has been spilled into the printer, or the printer has been exposed to water. - The printer has been dropped, or the cabinet has been damaged. - The printer doesn't function normally when you are following the operating instructions Safety Compliance This product conforms the following safety standards: • UL1950 • CSA C22.2 No. 950 • EN 60950 • IEC 950 Class 1 Laser Device and CDRH Compliance This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This certification indicates that the printer does not emit hazardous laser radiation. Since radiation emitted inside the printer is completely confined within the protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 1976. These regulations apply to laser products marketed in the United States. The label on the printer indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. EMC Standards This product also conforms to the following EMC standards: • VCCI V-3/97.04 • AS/NZS 3548:1995 including A1:1997 and A2:1997 • EN55022: 1994 including A1:1995 and A2:1997 • FCC Part 15, Subpart B (CFR 47, 1995) • CISPR22: 1993 including A1:1995 and A2:1996 4 English