Oki C3200n Guide: Handy Reference C3200 (Am English) - Page 33

Error Messages (cont.) SET XXX ON MPTRAY AND PUSH ON-LINE SWITCH The printer has received a job for printing from the Multi-Purpose Tray and no media is loaded in the tray. What to Do Load the requested media (xxx) in the Multi-Purpose Tray, then press ON LINE. t NEAR END Appears on the second line of the display to indicate that the media in tray t is almost out. What to Do Load more media in the tray before printing any large print jobs from that tray. REMOVE THE PAPER 480: STACKER FULL The stack of paper in the top (face down) output tray is blocking the printed sheets trying to exit the printer. What to Do Remove the stack of printed sheets from the top output tray. CHECK FUSER UNIT 320: FUSER UNIT MISSING The fuser is not properly installed. What to Do Open the top cover and check the fuser: 1. Press down on the fuser to be sure it is firmly locked in place. The message should disappear. Note: If the message still appears, push the blue latches at either end of the fuser back (toward the printer cover hinge) and lift the fuser out, then lower it back into the printer, pushing it firmly down in place. You should feel the latches at either end engage. 2. Close the cover. 32