Oki C3200n Computer Connections & Software Install Guide, Guide pour la co - Page 10

Macintosh Installation: Connections Network Connection Note: For Mac OS 10.2 or above, and an EtherTalk interface. The Ethernet cable is not supplied with the printer. Use an Ethernet cable with RJ45 connectors at either end. □ Turn off the printer. □ Connect your Ethernet cable to the network port on the hub or switch. □ Remove the plastic cap from the Ethernet port (1) on the printer and connect the other end of the cable to the port. □ Turn on the printer and wait for the print server status light (2) to stop blinking. □ Press the Test button (3). The Network Information configuration sheets print. Keep these sheets handy: they contain information you need to set up the printer on your network. USB Port Connection Note: No USB interface cable is supplied with the printer. Use a cable that is compatible with USB specification 1.1 or 2.0. • Printer operation is not assured if another USB compatible device is connected concurrently with it. • If a USB hub is used and you encounter problems, connect the printer directly to the computer. • Depending upon the size of the document, if the memory setting for the print monitor is low, you may not be able to print in the background. To correct for this, increase the memory setting for the print monitor. • Depending on the Macintosh model you have, you may need to install updates to the operating system in order to use USB: e.g., iMac Update 1.0, iMac Update 1.1, iMac Firmware Update, etc. For further information, contact Apple Computers. □ Turn off the computer and the printer. □ Connect the USB cable to the USB port on the computer. □ Connect the other end of the cable to the black USB Port (1)-not the plugged Ethernet port!-on the printer. 10