Oki C3200n Guide: User's, C3200n, American English - Page 112
USB Problems, Cannot con for USB connection, Windows NT 4.0 does not support USB. Windows
View all Oki C3200n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
USB Problems Cannot configure for USB connection NOTE Windows NT 4.0 does not support USB. Windows 98 upgraded from Windows 95 may not support USB. Possible cause Remedy USB cable does not meet Use USB cable to specification Ver.1.1. specifications. Interface is disabled. Check that USB interface is set to Enable in the menu (USB MENU →USB →ENABLE). Configuration procedure was not correctly followed or cancelled. Configure again from the beginning. USB cable is disconnected or faulty. Reconnect or try another cable. A USB hub is being used. The printer cannot be used with a USB hub. Connect the printer and computer directly. The USB cable is installed in the Ethernet port. Make sure the USB cable is plugged into the black USB port (1) on the printer: c52_usb_2_crop.jpg C3200n User's Guide Troubleshooting • 112