Oki C5300n Handy Reference Guide - Page 45
Check Fuser Unit, Fuser Unit Missing, Xxx Toner Sensor Error, Disk File System Full
View all Oki C5300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Error Messages (cont.) CHECK FUSER UNIT 320: FUSER UNIT MISSING The fuser is not properly installed. What to Do Open the top cover and check the fuser: 1. Press down on the fuser to be sure it is firmly locked in place. The message should disappear. Note: If the message still appears, push the blue latches at either end of the fuser back (toward the printer cover hinge) and lift the fuser out, then lower it back into the printer, pushing it firmly down in place. You should feel the latches at either end engage. 2. Close the cover. XXX TONER SENSOR ERROR Appears on the second line of the display to indicate that there is a problem with the color xxx toner sensor. What to Do Turn the printer off, then on again. If this does not clear the message, call your local service dealer. DISK FILE SYSTEM FULL The printer's internal hard drive does not have enough memory to print the current job. What to Do Either print out or delete some of the files already on the printer's hard drive ( see pages 20 and 21). Note:You can also use the OKI Storage Device Manager utility to clean up the printer's hard disk drive. See your on-line User's Guide for more information. 44