Oki C530dn Image Drum Replacement Instructions (English, Fran栩s, Es - Page 2

7. Holding the new image drum by the blue handles, lower it into the machine, aligning the pegs at each end with the slots in the sides of the printer cavity. Important! Do not re-install your old toner cartridges at this time. 10. Slide the locking collars to the right (1) and remove the priming cartridges (2). Place them in the disposal bags (3) supplied and discard in accordance with local regulations. 8. Close the top cover and press down firmly so that the cover latches closed. Note The machine automatically starts the priming process which takes about 4 minutes. The LCD screen illuminates and the Attention LED flashes. Ignore any on-screen messages. 11. Remove the original toner cartridges from the old image drum (a, b) and install them in the new image drum (c, d, e). b a e d When the priming process is complete, the light on the LCD screen goes out and the motor stops turning. If the Attention LED continues to flash, ignore it. 9. Open the machine's top cover fully. b a c a b c 12. Place the old drum in the shipping packaging and discard in accordance with local regulations. 13. Close the machine. The machine automatically initializes. 2 English