Oki C9300 C9300/C9500 Duplexer Installation Instructions - Page 1
Oki C9300 Manual
View all Oki C9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
C9300/C9500 Duplexer Installation Instructions Duplexer Part Number: 70040501 Phase 1 - Install ! If you will be using the duplex unit to print complicated files with graphics, you need to purchase and install 64 MB additional printer memory (OKI # 70041001). 1. Unpack the duplex unit and remove any shipping materials. 2. Turn off the printer and then pull out Tray 1. 3. Push up on the latches at either end of the front cover and remove it from the printer. ! Do not throw the front cover away; it is required if the duplexer is removed from the printer. 4. Place the duplex unit on top of Tray 1 and align it so that it is flush with the tray. 5. Open the small cover on the duplex unit and pull the blue handle gently until the duplex unit and Tray 1 are locked together. 6. Gently slide the tray/duplex unit back into the printer. 7. Turn back on the printer. Phase 2 - Activate the Duplex Unit in the Driver WINDOWS® PCL DRIVER 1. Click Start - Settings - Printers. The Printers dialog box opens. 2. Right-click the OKI C9300 or C9500 PCL printer icon, then click Printing Preferences (Windows 2000), Properties (Windows XP, Me, 98, 95) or Document Defaults (Windows NT 4.0). 3. On the Paper tab, click Device options. Or, with Windows XP, select the Device Option tab. 4. Click Duplex option unit to select it, then click OK. 5. Click OK, then close the Printers dialog box. WINDOWS POSTSCRIPT® DRIVER 1. Click Start - Settings - Printers. The Printers dialog box opens. 2. Right click the OKI C9300 or C9500 PostScript printer icon, then click Properties. 3. Change the setting: WINDOWS XP, 2000 AND NT 4.0: a. Click the Device Settings tab. b. Scroll down to Installable Options and click Duplex. c. Under Change 'Duplex' Set- ting, click Installed. WINDOWS ME, 98 AND 95: a. Click the Device Options tab. b. Click Duplex. c. Under Change setting for: Duplex, click Installed. 4. Click OK, then close the Printers dialog box. MACINTOSH® DRIVER (OSX) 1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable. MACINTOSH® DRIVER (CLASSIC) 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer - Setup. 4. Click Configure. 5. Change the Duplex setting to Installed. 6. Click OK twice. 7. Close Chooser. 58364001