Oki C9300 C9300/C9500 High Capacity Feeder Installation Instructions - Page 2
Continued
View all Oki C9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Continued c. For legal size and larger media, position the brackets. 2. If using paper, fan it. 3. Place the print media in the tray. 4. Gently push back in the tray. 5. Set the Media Weight. You can use paper up to 54 lb. US Bond (113 lb. Index) in the auxiliary trays. The default setting is Auto. If you are consistently using a specific weight paper in the auxiliary trays, enter the printer menu and set the media weight for the trays. a. Press MENU repeatedly until MEDIA MENU appears on the display. b. Press ITEM + repeatedly until you see TRAY2 MEDIAWEIGHT on the display. c. Press VALUE + or VALUE repeatedly until the desired setting appears on the second line of the display. d. Press SELECT to engage the new setting. e. Repeat steps b through d for TRAY3 MEDIAWEIGHT, TRAY4 MEDIAWEIGHT and if you also installed an auxiliary tray, for TRAY5 MEDIAWEIGHT. f. Press ON LINE to exit the menu. PHASE 3:ACTIVATE THE HCF IN THE PRINTER DRIVER Windows® PCL Driver 1. Click Start - Settings - Printers. The Printers dialog box opens. 2. Right click the OKI C9300 or C9500 PCL printer icon, then click Printing Preferences (Windows 2000), or Properties (Windows XP, NT, Me, 98, 95). 3. Click the Device Options tab. 4. At Available Tray, set the total number of trays installed (4 for printer + HCF or 5 for printer + HCF + auxiliary tray), then click OK. 5. Click OK, then close the Printers dialog box. Windows PostScript® Driver 1. Click Start - Settings - Printers. The Printers dialog box opens. 2. Right click the OKI C9300 or C9500 PostScript printer icon, then click Properties. 3. Click the Device Settings tab (Windows XP, 2000 and NT 4.0) or the Device Options tab (Windows Me, 98, 95). 4. Under Installable Options, click Available Tray or (Additional Trays) and select the number of additional trays installed (3 for HCF or 4 for HCF + auxiliary tray). 5. Click OK, then close the Printers dialog box. Macintosh® Driver (OSX) 1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable. Macintosh® PostScript Driver 1. Activate Chooser from the Apple menu. 2. Select LaserWriter 8. 3. Click Printer - Setup. 4. Click Configure. 5. Change the Available Tray setting to match the number of additional trays installed (3 for HCF or 4 for HCF + auxiliary tray). 6. Click OK twice. 7. Close Chooser. 58365001