Oki C9300 C9300/C9500 Transfer Belt Replacement Instructions - Page 1

C9300/C9500 Transfer Belt Replacement Instructions Transfer Belt Part Number: 41946001 Caution! The fuser unit (at the back of the printer) may be HOT. Let it cool down before attempting to replace the transfer belt. 1. Turn off the printer. 2. Pull up on the handle and lift the cover. 4. Press the blue transfer belt lock levers (circled) to the left (toward the open cover). front of the belt into the slots at the front of the printer. 8. Using the blue handle, firmly push the unit into place. If necessary, pull the blue lock lever (circled) toward the front of the printer to lock the transfer belt into place. 3. Remove the four image drums/ toner cartridges, then cover them to protect them from light while you are replacing the transfer belt. 5. Grasp both handles and, primarily using the big blue handle, lift the transfer belt unit out of the printer. Discard in accordance with local regulations. 9. Replace the image drums/toner cartridges back into the printer, being careful to place them in the correct color position. 10. Close the cover and turn on the printer. 58364802 6. Unpack the new transfer belt unit. Caution! Be careful to avoid touching the shiny black surface of the transfer belt. 7. Holding the new transfer belt by the handles, lower it into the printer, carefully aligning the pins at the