Oki ES3640eMFP ES3640e MFP EFI Configuration Guide - Page 70
Protocol Setup options, AppleTalk Setup
View all Oki ES3640eMFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
44-70 Performing Setup from the Printing Unit Control Panel Network Setup Protocol Setup Ignore EOF Character Yes/No [Yes] This option appears only if Enable Parallel Port is set to Yes. This option specifies that the Fiery should ignore end-of-file (EOF) messages in a file. This option must be set to Yes to print PostScript files in binary format (not ASCII); under normal circumstances, it should be set to No. When this option is set to Yes, the Fiery uses the parallel port timeout value to determine when the end of the file has been reached. If you experience printing problems, set this option to No. Protocol Setup options To configure the Fiery, choose each protocol and enter the settings for that protocol. You can enable AppleTalk, TCP/IP, and IPX/SPX communication simultaneously. AppleTalk Setup Enable AppleTalk Yes/No [Yes] Select Yes if you have an AppleTalk network connected to the Fiery. This setting enables the Fiery to communicate over AppleTalk networks. AppleTalk Zone List of zones The Fiery searches the network for AppleTalk zones in your network segment. Scroll through the list to select the AppleTalk zone in which you want the Fiery to appear. If your segment has only one zone, the Fiery is assigned to that zone automatically. The message "No AppleTalk zone found" may mean your network has no zones, or the network cable is not connected (see Appendix A). ES3640e MFP EFI Configuration Guide - 70