Oki ES9465 ES9465/ES9475 MFP Management Guide

Oki ES9465 Manual

Get Oki ES9465 PDF manuals and user guides View all Oki ES9465 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki ES9465 manual content summary:

  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 1
    MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS / MULTIFUNCTIONAL DIGITAL SYSTEMS MFP Management Guide ES9455 MFP ES9465 MFP/ES9475 MFP
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 2
    ©2013 Oki Data Corporation All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of Oki Data.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 3
    names in this manual In this manual, each model name is replaced with the series name as shown below. Model name ES9455 MFP ES9465 MFP/ES9475 MFP Series name in this manual ES9455 MFP ES9475 MFP Series ‰ Options For the available options, refer to "Options" in the Quick Start Guide for your
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 4
    details on the touch panel menus may differ depending on the operating environment such as whether options are installed. y The illustration screens used in this manual are for paper in the A/B format. If you use paper in the LT format, the display or the order of buttons in the illustrations may
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 5
    Admin Menu 47 GENERAL ...49 Setting the device information 50 Setting the notification ...51 Changing the administrator password and resetting the service password 52 Setting the clock ...53 Setting the power save modes 55 Setting the calibration and registration display level 58 Setting the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 6
    the NetWare settings 87 Setting the SMB protocol...88 Setting the AppleTalk protocol 89 Setting the HTTP network service 90 Setting the Ethernet speed 91 Setting the LDAP services and the filtering functions 92 Setting IPsec (IP security 93 Checking the network ...94 COPY ...96 FAX ...98
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 7
    Setting the registered quota 149 Resetting all department counters 150 Deleting all department codes 151 Chapter 4 APPENDIX Setting Letters ...154 On-screen keyboard ...154 On-screen numeric keypad 155 List Print Format...156 TOTAL COUNTER LIST...156 DEPARTMENT CODE LIST 157 ADDRESS BOOK
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 8
    6 CONTENTS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 9
    SETTING ITEMS (USER) 1. Accessing the User Menu...8 GENERAL...9 Changing the display language ...9 Setting the reversed display ...10 Adjusting the display setting...10 Setting the auto calibration ...10 Setting the calibration ...10 Setting the registration ...11 COPY ...12 FAX ...13 SCAN ...14 E-
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 10
    20 "ADDRESS" P.14 "SCAN" P.42 "CHECK E-MAIL" P.16 "E-FILING" P.43 "CHANGE USER PASSWORD" y [CHANGE USER PASSWORD] is available only when the MFP Local Authentication function is enabled. y When the User Management function is enabled, the [ADMIN] tab will be unavailable for a user who logs into
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 11
    GENERAL You can change the initial settings (defaults) for the equipment. For instructions on how to display the GENERAL menu, see the following page: P.8 "Accessing the User Menu" 1 SETTING ITEMS (USER) This menu allows you to perform the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 12
    are not reproduced accurately in the images scanned by this machine. This function allows you to make more precise adjustments than the "AUTO CALIBRATION". Instructions on how to perform calibration are the same as when it is performed from the ADMIN menu. See the following page: P.58 "Setting the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 13
    ) „ Setting the registration When color misregistration occurs, you can align the position of each color. This button is available only for some models. Instructions on how to perform registration are the same as when it is performed from the ADMIN menu. See the following page: P.59 "Setting the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 14
    COPY screen differ depending on the model. y For instructions on how to display the COPY screen, see the of the copy functions, refer to the Copying Guide. The screen is composed of multiple pages. Press with the original. y MANUAL - Press this button to set the contrast manually. A setting item for
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 15
    PREVIEW TYPE]. For details of other setting items, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS". y If the FAX Unit is only when the Scanner Kit or Printer/Scanner Kit is installed. y For instructions on how to display the FAX screen, see the following page: P.8 "Accessing
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 16
    only when the Scanner Kit or Printer/Scanner Kit is installed. y For instructions on how to display the SCAN screen, see the following page: P.8 " details of the Omit Blank Page function, refer to the Scanning Guide "Chapter 3: USEFUL FUNCTIONS". Select the desired sensitivity from 7 levels
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 17
    for scans. ([ORIGINAL MODE] is not available in Gray Scale mode.) Select the desired exposure for scans. BACKGROUND ADJUSTMENT To set the contrast manually, press or and set the desired contrast level. To set the contrast automatically in accordance with the original, press [AUTO]. Select the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 18
    that have been stored by Scan to e-Filing. The e-Filing function is available only when the hard disk is installed on the equipment. For instructions on how to display the E-FILING screen, see the following page: P.8 "Accessing the User Menu" Item name GENERAL PHOTOGRAPH PRESENTATION LINE ART
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 19
    LIST You can print the lists below. 1 SETTING ITEMS (USER) y For instructions on how to display the LIST screen, see the following page: P.8 "Accessing the User Menu" y The list is printed on paper that is fed from
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 20
    1 SETTING ITEMS (USER) TRAY You can set the paper size and paper type for each tray. For instructions on how to display the TRAY screen, see the following page: P.8 "Accessing the User Menu" 1 On the TRAY screen, press the portion of the illustration
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 21
    the model. y For details of the paper types, refer to the Copying Guide "Chapter 1: BEFORE USING EQUIPMENT". y Paper placed in a tray set with the Automatic Paper Selection (APS). For details of APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES". y When an attribute other than [NONE] is
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 22
    contacts in address book" y P.30 "Managing groups in address book" For instructions on how to display the ADDRESS BOOK menu, see the following page: P.8 in the TopAccess administrator mode. For details, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". ‰ Creating new contacts You
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 23
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) Registering contacts from the SETTING using [ADDRESS] button 1 Press an undefined button to register a new contact and press [ENTRY]. The ADDRESS BOOK REGISTRATION screen is displayed. If the touch panel does not display an undefined button, press to
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 24
    fax transmission. y This step is available only when the FAX Unit is installed. y For details of the options for fax transmission, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS". 4 Press [OK] to register the contact. The contact is registered in the address book. 22 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 25
    the LDAP server y E-mail addresses that were manually entered, or that were searched from the LDAP be registered from the Scan Log: y E-mail addresses that were manually entered 1 Press [JOB STATUS] on the touch panel. 2 instructions on how to enable the [BCC Address Display] option, refer
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 26
    fax transmission. y This step is available only when the FAX Unit is installed. y For details of the options for fax transmission, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS". 6 Press [OK] to register the contact. The contact is registered in the address book. 24 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 27
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) ‰ Editing or deleting contacts You can edit (or delete) contact information registered in the address book. 1 On the ADDRESS BOOK screen, press the contact that you want to edit and press [EDIT]. The ADDRESS BOOK EDIT screen is displayed. y If the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 28
    fax transmission. y This step is available only when the FAX Unit is installed. y For details of the options for fax transmission, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS". 4 Press [OK] to save the contact. The edited contact information is saved. 26 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 29
    touch panel displays the found contact. Press the contact, and then [EDIT] to edit the contact information. Or, press [DELETE] to delete the contact. For instructions on editing or deleting contacts, see the following page: P.25 "Editing or deleting contacts" ADDRESS 27
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 30
    1 SETTING ITEMS (USER) Searching for contacts by entering a search string 1 On the ADDRESS BOOK screen, press [SEARCH]. The ADDRESS SEARCH screen is displayed. 2 Press the button of the item target of the search. y When you press a button other than [FAX NO.], the on-screen keyboard is displayed.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 31
    ITEMS (USER) 5 The touch panel displays the found contacts. Press the desired contact and press [OK] to edit the contact information. For instructions on editing contacts, see the following page: P.25 "Editing or deleting contacts" Press or to display the found contacts on different pages if one
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 32
    1 SETTING ITEMS (USER) „ Managing groups in address book You can create groups that contain multiple contacts to enable you to specify groups instead of each recipient separately when operating Scan to E-mail, or fax or Internet Fax transmissions. In the address book, you can register up to 200
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 33
    MEMBER screen is displayed. 5 Select the contacts that you want to add to the group and press [OK]. y To add contacts by selecting each contact manually, see the following page: P.35 "Adding or removing contacts" y To add contacts by searching for them by ID number, see the following page: P.35
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 34
    1 SETTING ITEMS (USER) 6 The new group is created and it appears on the touch panel. 32 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 35
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) ‰ Editing or deleting groups You can edit and delete groups registered in the address book, as well as add and remove contacts to/from a group. Deleting a group does not delete the contacts from the [SINGLE] tab. However, deleting a contact in the [
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 36
    next step. y If you need to change the members in the group, see the following pages: - Adding or removing contacts by selecting each contact manually P.35 "Adding or removing contacts" - Adding or removing contacts by searching for them by ID number P.35 "Adding or removing contacts by searching by
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 37
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) Adding or removing contacts 1 To add a contact to the group, press a non-highlighted contact to highlight it. To remove a contact from the group, remove its highlight. When the addition or removal of contacts is complete, press [OK]. y To add/remove
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 38
    1 SETTING ITEMS (USER) 3 To add a contact to the group, press the contact to highlight it. To remove a contact from the group, clear its highlight. When the addition or removal of contacts is complete, press [OK]. y To add/remove both the fax number and E-mail address of a contact to/from the group
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 39
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) 3 Enter the search string and press [OK]. 4 Specify the search string in the items that you require and press [SEARCH]. Press [CLEAR] to clear the search strings you entered. 5 The touch panel displays the found contacts. Press the contact you want to
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 40
    press [OK]. The touch panel displays the found groups. 3 Press the button of the desired group and proceed to the edit or delete operation. For instructions on editing or deleting groups, see the following page: P.33 "Editing or deleting groups" 38 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 41
    1.SETTING ITEMS (USER) Searching for groups by group name 1 On the ADDRESS BOOK screen, press [SEARCH]. 1 SETTING ITEMS (USER) The GROUP SEARCH screen is displayed. 2 Press [GROUP NAME]. The on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 42
    1 SETTING ITEMS (USER) 5 The touch panel displays the found groups. Press the desired group and press [OK] to edit the group information. For instructions on editing or deleting groups, see the following page: P.33 "Editing or deleting groups" 40 ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 43
    1.SETTING ITEMS (USER) 1 SETTING ITEMS (USER) ‰ Confirming the members of a group You can confirm the contacts that are registered in a group. 1 On the ADDRESS BOOK screen, press [CONTENTS] of the group whose members you want to confirm. The contacts registered in the group are displayed. In the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 44
    perform this operation, the POP3 server must be configured using TopAccess. For instructions on how to configure the POP3 server, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". y For instructions on how to display the CHECK E-MAIL screen, see the following page: P.8 "Accessing
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 45
    that has been entered in the authentication screen from this menu. y [CHANGE USER PASSWORD] is available only when the MFP Local Authentication function is enabled. y For instructions on how to display the CHANGE USER PASSWORD screen, see the following page: P.8 "Accessing the User Menu" 1 Change
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 46
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 47
    the Admin Menu 47 GENERAL...49 Setting the device information ...50 Setting the notification ...51 Changing the administrator password and resetting the service password 52 Setting the clock ...53 Setting the power save modes ...55 Setting the calibration and registration display level 58 Setting
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 48
    INTERNET FAX ...102 SECURITY...103 Managing certificates ...103 Setting secure PDF ...109 Performing the integrity check...111 LIST/REPORT ...113 Setting the report...113 Performing the integrity check...111 PRINTER/e-FILING ...118 WIRELESS SETTING...120 CHANGE USER PASSWORD 121 802.1X SETTINGS...
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 49
    . y When the User Management function is enabled, you must log into the MFP as a user with administrator privileges. When you press the [ADMIN] tab, the privileges to users. For details of role information, refer to the TopAccess Guide "Chapter 7: [User Management] Tab Page". 3 Press [PASSWORD]. The
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 50
    2 SETTING ITEMS (ADMIN) The SETTING screen contains the following buttons. For details of each button, see the corresponding page. P.49 "GENERAL" P.103 "SECURITY" P.78 "NETWORK" P.113 "LIST/REPORT" P.96 "COPY" P.118 "PRINTER/e-FILING" P.98 "FAX" P.120 "WIRELESS SETTING" P.99 "FILE" P.126
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 51
    settings (defaults) for the equipment. 2 SETTING ITEMS (ADMIN) For instructions on how to display the GENERAL menu, see the following page: Setting the notification" P.52 "Changing the administrator password and resetting the service password" P.53 "Setting the clock" P.55 "Setting the power save
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 52
    ], the on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" y When you press [SERVICE PHONE NUMBER], the on-screen numeric keypad is displayed. For details of the on-screen numeric keypad, see the following page: P.155 "On-screen
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 53
    when specified events occur on the equipment, such as paper empty and service call. You can specify up to three E-mail addresses for the using the TopAccess web utility. For instructions on how to specify events for notification, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page".
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 54
    PASSWORD] has been selected, the message "Are you sure?" is displayed on the ATTENTION screen. Press [YES] to reset the service password. 2 Press [OLD PASSWORD]. The on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" 3
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 55
    time settings of the equipment are adjusted using the SNTP service, the date and time cannot be set manually. You can make settings for the SNTP service in the TopAccess administrator mode. For details, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". Changing the date and time
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 56
    2 SETTING ITEMS (ADMIN) 2 Highlight the section that you want to edit using the arrow buttons, enter the value using the digital keys, and press [OK]. You will be returned to the CLOCK menu screen. When you change either "YEAR", "MONTH", or "DATE", the day of week in the DAY section will be set
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 57
    procedures for entering each mode, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". Neither the [AUTO POWER SAVE] nor [SLEEP/SUPER SLEEP] button is displayed in the European version. Contact your service representative to change the default setting for each button. Setting the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 58
    2 SETTING ITEMS (ADMIN) 4) Press [OK] to save the settings. y If you want to clear an entered time, press the [CLEAR] button on the control panel. y If you want to put the equipment into the Sleep or Super Sleep mode for an entire day, enter the same time in both the [ON] and [OFF] boxes. Example)
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 59
    - A particular option is installed. (Wireless LAN module, OKI IC Card Reader) - The IPsec function is enabled. - - IPv6 is enabled and the IPv6 address is set other than manually. - POP3 client setting is enabled and under any of the following Guide "Chapter 8: [Administration] Tab Page". GENERAL 57
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 60
    during the calibration. y If the color often deviates, call your service technician. *1 Place paper in the Large Capacity Feeder if one is Reversing Automatic Document Feeder is an option depending on the model. For instructions on how to display the CALIBRATION screen, see the following page: P.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 61
    to allow registration by not only administrators but also users, is set by DISPLAY LEVEL. For instructions on how to change the display level, see the following page: P.58 "Setting the calibration and notifying the occurrence of specified events, such as paper empty and toner low. GENERAL 59
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 62
    TONER NEAR EMPTY MESSAGE PAPER EMPTY MESSAGE LEFT TRAY (LCF) PAPER EMPTY MESSAGE Description Enabling this option displays a message at the lower left of the screen when toner is low in a toner installation, be sure to follow the service technician's instructions. Viewing product information 1 On
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 63
    equipment, and press [OK]. The SELECT A FILE screen is displayed. For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". GENERAL 61
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 64
    2 SETTING ITEMS (ADMIN) 3 Select the option that you want to install, and press [INSTALL]. The installation confirmation screen is displayed. 4 Press [YES]. The installation begins. Do not remove the USB storage device until the data transfer is complete. Removing the device while data are being
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 65
    language pack in the root directory of your USB storage device in advance. y For information of languages which can be newly added, contact your service technician. Adding a language 1 On the LANGUAGES screen, press [INSTALL]. The LOCALIZATION PACK INSTALLATION screen is displayed. GENERAL 63
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 66
    press [OK]. The SELECT A FILE screen is displayed. For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 3 Select the language pack that you want to install, and press [INSTALL]. The installation confirmation screen is displayed. 4 Press [YES
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 67
    2.SETTING ITEMS (ADMIN) 5 When the installation is complete, press [OK]. 2 SETTING ITEMS (ADMIN) You will be returned to the GENERAL menu (2/2). If the installation fails, the message "Installation Failed." will be displayed on the CAUTION screen. In this case, press [CLOSE], and perform the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 68
    system software and version but you will not be able to update the system of your equipment though. y To obtain the updating files, contact your service technician. y Before performing the operation, store the updating files in the root directory of your USB storage device in advance. 66 GENERAL
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 69
    equipment, and press [OK]. The USB LIST screen is displayed. For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 4 Select the file type, and press [OK]. The SYSTEM UPDATES screen is displayed. GENERAL 67
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 70
    2 SETTING ITEMS (ADMIN) 5 Select the file that you want to install, and press [INSTALL]. The installation confirmation screen is displayed. 6 Press [YES]. The installation begins. y Do not remove the USB storage device until the data transfer is complete. Removing the device while data are being
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 71
    files are compatible with models of the same MFP series but not with those of others. When of the cloning function, contact your service representative. Installing the clone data 1 USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 3 Select the file that you want
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 72
    2 SETTING ITEMS (ADMIN) 4 Confirm the file name and file contents, and press [INSTALL]. The PASSWORD REQUEST screen is displayed. 5 Press [PASSWORD]. The on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" 6 Enter the password
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 73
    2.SETTING ITEMS (ADMIN) 8 Press [YES]. 2 SETTING ITEMS (ADMIN) The installation begins. Do not remove the USB storage device until the data transfer is complete. Removing the device while data are being transferred could destroy them or cause a malfunction of the equipment. 9 When the installation
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 74
    location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". y For data you do not need to duplicate, press Menu with Template/Address Book Network settings, Print service, Wireless LAN, Directory Service Address Book Address Book, Template, Mailboxes 3 Enter
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 75
    2.SETTING ITEMS (ADMIN) 2) Press [PASSWORD] to enter a password. 3) Press [RETYPE PASSWORD] to enter the password again. 4) Press [SAVE]. 2 SETTING ITEMS (ADMIN) Creating of the clone files begins. When you press [File Name], [PASSWORD], and [RETYPE PASSWORD], the on-screen keyboard is displayed.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 76
    you open the front cover of the equipment during the panel calibration operation and instructions to replace toner cartridges are displayed, close the front cover to complete the panel calibration operation port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 74 GENERAL
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 77
    ] is displayed only when the hard disk is installed on the equipment. For instructions on how to resolve the cause of a skipped copy or print job, refer to the Copying Guide "Chapter 7: CONFIRMING JOB STATUS" and Printing Guide "Chapter 5: MANAGING PRINT JOBS FROM THE CONTROL PANEL". GENERAL 75
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 78
    2 SETTING ITEMS (ADMIN) „ Changing the keyboard layout You can change the layout of the on-screen keyboard to a different one. On the KEYBOARD LAYOUT screen, select the desired keyboard layout, and press [OK]. You will be returned to the GENERAL menu (2/2). The keyboard layout is changed as follows.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 79
    print heads are stained, the copied or printed image may have unevenness or white streaks in the horizontal direction. Clean by following the instructions displayed on the screen. Once you finished cleaning according to the procedure, press [FINISH] on the screen. This button is available only for
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 80
    can set various network functions. For instructions on how to display the NETWORK 90 "Setting the HTTP network service" y P.91 "Setting the Ethernet speed" y P.92 "Setting the LDAP services and the filtering functions" (when manually assigned). How the TCP/IP protocol must be set depends
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 81
    [DYNAMIC] when you do not know the TCP/IP settings that should be assigned to the equipment. If [DYNAMIC] is selected when your network supports the DHCP, the IP address, subnet mask, default gateway, primary WINS server address, secondary WINS server address, POP3 server address, and SMTP server
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 82
    , by selecting the addressing mode. How the IPv6 address is acquired depends on the addressing mode you select. y When you select [MANUAL]: You assign the IPv6 address, prefix and default gateway manually. In this mode, it is possible to register one IPv6 address. P.81 "Setting the IPv6 protocol
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 83
    y ENABLE - Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution) protocol. y DISABLE - Press [DISABLE] to disable the LLMNR protocol. Select [MANUAL] for the IPv6 addressing mode. The unique address used in IPv6 is displayed. y The link-local address cannot be used to connect to
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 84
    2 SETTING ITEMS (ADMIN) 3 Confirm the settings and press [OK]. You will be returned to the NETWORK menu. Setting the IPv6 protocol automatically (in a stateless network environment) 1 On the IPv6 screen, specify the following items as required and press . Item name IPv6 PROTOCOL LLMNR ADDRESS MODE
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 85
    2.SETTING ITEMS (ADMIN) 2 Specify the following items as required and press . 2 SETTING ITEMS (ADMIN) Item name ENABLE DHCP (IP Address) ENABLE DHCP (OPTIONS) FQDN Option FQDN Update Method Description y ENABLE - Press this button to use the IPv6 address issued by the DHCPv6 server. y DISABLE -
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 86
    2 SETTING ITEMS (ADMIN) 4 Confirm the settings and press [OK]. You will be returned to the NETWORK menu. The IPv6 address acquired from the DHCPv6 server is displayed. Setting the IPv6 protocol automatically (in a stateful network environment) 1 On the IPv6 screen, specify the following items as
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 87
    2.SETTING ITEMS (ADMIN) 2 Specify the following items as required and press . 2 SETTING ITEMS (ADMIN) Item name ENABLE DHCP (IP Address) ENABLE DHCP (OPTIONS) FQDN Option FQDN Update Method Description y ENABLE - Press this button to use the IPv6 address issued by the DHCPv6 server. y DISABLE -
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 88
    2 SETTING ITEMS (ADMIN) „ Setting the IPX/SPX protocol You can set the IPX/SPX protocol in this equipment. The IPX/SPX protocol is normally used to communicate with the NetWare file server through the network. Item name ENABLE IPX/SPX FRAME TYPE Description y ENABLE - Press this button to use the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 89
    2.SETTING ITEMS (ADMIN) „ Setting the NetWare settings You can set the NetWare configuration to be connected. This option must be set when you use the NetWare file server for Novell printing. 2 SETTING ITEMS (ADMIN) Item name ENABLE Netware ENABLE BINDERY ENABLE NDS CONTEXT TREE FILE SERVER NAME
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 90
    allows you to enable the file sharing service in addition to SMB printing. Furthermore, network. The NetBIOS name is set to "MFP" by factory default. Displays how to change the setting, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". Press this button
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 91
    SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) y When you select [DISABLE] for [SMB PROTOCOL] or [FILE SHARE] for [RESTRICTION], the Save as File to MFP Local function is disabled. y If this equipment is set to log on to the domain in the SMB Session of TopAccess (administrator mode) but "Workgroup
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 92
    PRIMARY PORT NUMBER SECONDARY PORT NUMBER Description y ENABLE - Press this button to use the HTTP network server service. y DISABLE - Press this button to disable the HTTP network server service. This option must be enabled for TopAccess and the e-Filing web utility. Select whether or not to use
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 93
    mode even if [ENABLE] is selected in the SLEEP/SUPER SLEEP screen when ETHERNET is set to [AUTO (-1000MB)], [1000BASE FULL], or [1000BASE]. - ES9455 MFP y The current Ethernet speed is displayed above the buttons. "Link not detected" is displayed when links failed to be detected. y If the network is
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 94
    must operate using TopAccess. For details on how to register the directory service, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". If the LDAP network service is disabled, you will not be able to acquire the "From Address" from the LDAP server during the User Authentication
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 95
    . Press this button to disable IPsec communication. Press this button to manually clear (flush) the current IPsec session and start a new session when can be performed from TopAccess. For details, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". [IPsec] is available only when
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 96
    from the server list displayed on the touch panel: Checkable servers and supported protocols are as follows. - Primary DNS server (IPv4/IPv6) - To designate the desired server manually: Enter the server name, IPv4 address, or IPv6 address manually. When you press the Manual Input field, the onscreen
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 97
    2.SETTING ITEMS (ADMIN) 2 Check the results. When finished, press [CLOSE]. When you performed ping: 2 SETTING ITEMS (ADMIN) When you performed traceroute: When the ping/traceroute command can reach a server, the IP address is displayed for the check result for the server. If the command cannot
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 98
    2-sided mode, and the sort mode priority. For instructions on how to display the COPY screen, see the following source also when the paper source has been manually specified for a copy job. Selecting [ON] For details of APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES". PAPER OF
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 99
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) COPY screen (3/3) Item name AUTO STACKER CHANGE (CASCADE PRINT) WASTE HOLE PUNCH TRAY FULL ORIGINAL OUTSIDE ERASE Description y ON - Press this button to continue printing by automatically changing the stacker when the original stacker becomes full.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 100
    details of other fax menus, refer to the Operator's Manual for FAX Unit "Chapter 6: SETTING ITEMS". y When or Printer/Scanner Kit is installed. y For instructions on how to display the FAX screen, see * For discard print setting details, contact your service technician. REDUCTION: ON, OFF y ON -
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 101
    the local storage to secure available hard disk space. This menu is not displayed when the hard disk is not installed on the equipment. For instructions on how to display the MAINTENANCE screen, see the following page: P.47 "Accessing the Admin Menu" 1 On the MAINTENANCE screen, enable the storage
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 102
    into the specified fragment size. This option can reduce transmission errors caused by network traffic problems. y E-mail Body String Transmission You can specify whether or not to send the body string. For instructions on how to display the E-MAIL screen, see the following page: P.47 "Accessing the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 103
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) When you press [FROM ADDRESS], [FROM NAME] or [BODY], the on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" Operations in the SUBJECT screen Select whether to use the default
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 104
    into the fragment size specified. This option can reduce transmission errors caused by network traffic problems. y Internet Fax Body String Transmission You can specify whether or not to send the body string. For instructions on how to display the INTERNET FAX screen, see the following page: P.47
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 105
    the following operations: y P.103 "Managing certificates" y P.109 "Setting secure PDF" y P.111 "Performing the integrity check" 2 SETTING ITEMS (ADMIN) For instructions on how to display the SECURITY screen, see the following page: P.47 "Accessing the Admin Menu" „ Managing certificates You can
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 106
    , and press [OK]. The screen for choosing a file is displayed. For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 104 SECURITY
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 107
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) 5 Select the certificate that you want to import, and press [OK]. y When the file extension is ".pfx" or ".p12", the PASSWORD REQUIRED screen will be displayed. Proceed to the next step. y When the file extension is any other than above, importing
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 108
    2 SETTING ITEMS (ADMIN) 8 Press [OK]. Importing the certificate begins. Do not remove the USB storage device until the data transfer is complete. Removing the device while data are being transferred could destroy them or cause a malfunction of the equipment. 9 When importing the certificate is
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 109
    [OK]. The EXPORT CERTIFICATE screen is displayed. For the location of the USB port on the equipment, refer to the Quick Start Guide "Chapter 1: PREPARATIONS". 4 Press [DEVICE CERTIFICATE]. Exporting the certificate begins. Do not remove the USB storage device until the data transfer is complete
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 110
    2 SETTING ITEMS (ADMIN) 5 When exporting is complete, press [OK]. You will be returned to the SECURITY screen. 6 Remove the USB storage device from the USB port on the equipment. 108 SECURITY
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 111
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) „ Setting secure PDF You can set the default values for the encryption that will be applied when generating a secure PDF file from data scanned on this equipment. You can also enable or disable the forced encryption mode. This security settings
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 112
    2 SETTING ITEMS (ADMIN) y Different passwords must be set for [USER PASSWORD] and [MASTER PASSWORD]. y Enter 1 to 32 alphanumeric characters for [USER PASSWORD] and [MASTER PASSWORD]. The input password appears as asterisks (*). y When the lock icon next to the [USER PASSWORD] box is highlighted (
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 113
    , press [CLOSE], and wait until the job is complete, then perform the operation again. y If an error, such as illegally modified data, is detected, the service call screen will be displayed. In this case, contact your
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 114
    2 SETTING ITEMS (ADMIN) 4 Press [OK] to reboot the equipment. The equipment reboots. 112 SECURITY
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 115
    "Setting the report" y P.116 "Printing lists" 2 SETTING ITEMS (ADMIN) For instructions on how to display the LIST/REPORT menu, see the following page: P.47 " available on this equipment. Journals can be printed either automatically or manually. If you select [AUTO], you can specify the number of
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 116
    2 SETTING ITEMS (ADMIN) 3 Specify the following items as required and press [OK]. Item name AUTO TX JOURNAL RX JOURNAL Description Press [ON] to enable printing the transmission and reception journals automatically. When you enable this option, the transmission and reception journals will be
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 117
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) 3 Specify the conditions for each transmission type and press [OK]. Item name MEMORY TX DIRECT TX MULTI TX POLLING RELAY ORIGINATION RELAY STATION RELAY DESTINATION Description y OFF - Press this button to disable printing of communication report.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 118
    2 SETTING ITEMS (ADMIN) 2 Press [RECEPTION LIST]. The RECEPTION LIST screen is displayed. 3 Specify whether to print the reception list for each transaction type and press [OK]. Item name RELAY STATION LOCAL REMOTE Description Select [ON] to print the reception list when a relay transmission has
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 119
    2.SETTING ITEMS (ADMIN) 2 Press the button of the list that you want to print. 2 SETTING ITEMS (ADMIN) The selected list is printed. LIST/REPORT 117
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 120
    installed on the equipment. For instructions on how to display the box, refer to the Printing Guide "Chapter 2: PRINTING FROM WINDOWS [Auto] is selected for With tray specified manually the paper source A4 and A4-R paper are in 600x1200 dpi (PS). - ES9455 MFP PRINTER / E-FILING screen (2/2) Item
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 121
    require touch panel operation. For details of Private Print jobs and Hold Print jobs, refer to the following chapters of the Printing Guide. y Chapter 2: PRINTING FROM WINDOWS y Chapter 3: PRINTING FROM Macintosh y Chapter 4: MANAGING PRINT JOBS FROM THE CONTROL PANEL This option is available when
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 122
    the Wireless LAN Module. For details of wireless LAN settings, refer to the Operator's Manual for Wireless LAN Module "Chapter 1: SETTING UP WIRELESS NETWORK". This button is displayed only in some models. For instructions on how to display the WIRELESS SETTING screen, see the following page: P.47
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 123
    CHANGE USER PASSWORD] is available only when the MFP Local Authentication function is enabled. This function can be enabled from TopAccess administrator mode. For details, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". For instructions on how to display the CHANGE USER PASSWORD
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 124
    IEEE 802.1X authentication that will apply to wired networks. This equipment supports the following authentication methods: y EAP-MSCHAPv2 y EAP-MD5 y y For instructions on how to install certificates, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". y For instructions on how
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 125
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) „ Setting IEEE 802.1X authentication 1 On the WIRED 802.1X SETTINGS screen, specify the following items as required and press [NEXT]. Item name 802.1X Description y ENABLE - Press this button to use IEEE 802.1X authentication. y DISABLE - Press
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 126
    2 SETTING ITEMS (ADMIN) 3 Select the inner authentication method and press [Next]. Selecting inner authentication method is necessary only when you selected [PEAP] or [EAP-TTLS] in step 3. When you selected [PEAP]: When you selected [EAP-TTLS]: 4 Specify the following items as required and press
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 127
    be contacted [802.1X] Authentication failed Certificate verification Failure Cause y The RADIUS server service is stopped. y Configuration for the RADIUS server is not correct. y The IEEE 802.1X switch has problem. y The username or password that the user entered is not correct. y The certificates
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 128
    Scan to File E-mail Internet Fax Printer / e-Filing Printer Print Service Security Remarks All the settings are reset to the factory defaults. User cleared. The data are reset to the default XML. For instructions on how to display the FACTORY DEFAULT screen, see the following page: P.47
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 129
    2.SETTING ITEMS (ADMIN) 2 SETTING ITEMS (ADMIN) 1 On the CONFIRMATION screen of the FACTORY DEFAULT screen, press [OK]. The initialization begins. y If you want to back up the setting data and user data before initialization, use the cloning function to create clone files. For details of the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 130
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 131
    MANAGING COUNTERS (COUNTER MENU) 3. TOTAL COUNTER ...130 PRINT OUT TOTAL COUNTER 133 DEPARTMENT COUNTER...134 DEPARTMENT MANAGEMENT 138 Logging on as administrator ...138 Printing the department code list ...140 Enabling department codes...140 Registering a new department code...141 Editing
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 132
    3 MANAGING COUNTERS (COUNTER MENU) TOTAL COUNTER This menu allows you to display and confirm the following total counters: y Print counter Indicates the total number of sheets output by this equipment. The print counter contains the following counters: - Copy counter - Indicates the number of sheets
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 133
    3.MANAGING COUNTERS (COUNTER MENU) Displaying print counter 1 Press [PRINT COUNTER]. 3 MANAGING COUNTERS (COUNTER MENU) The PRINT COUNTER screen is displayed. 2 Select the button of the counter you want to check. (Only for color print models) The displayed items differ between the color print
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 134
    3 MANAGING COUNTERS (COUNTER MENU) 2 Select the button of the counter you want to check. 132 TOTAL COUNTER
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 135
    3 MANAGING COUNTERS (COUNTER MENU) PRINT OUT TOTAL COUNTER This menu allows you to print TOTAL COUNTER LIST. 1 Press the [COUNTER] button on the control panel to access the COUNTER menu. 2 Press [PRINT OUT TOTAL COUNTER]. y When the Department Management function is disabled, TOTAL COUNTER LIST is
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 136
    Management function set on copy/fax/printer/scan/list counter for department code can be disabled individually. For details, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". y Scan counter for department code This counter allows you to display the value of the scan counter for
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 137
    3.MANAGING COUNTERS (COUNTER MENU) 3 Press [DEPARTMENT CODE]. 3 MANAGING COUNTERS (COUNTER MENU) The on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" 4 Enter the department code and press [OK]. You will be returned to the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 138
    3 MANAGING COUNTERS (COUNTER MENU) Displaying print counter for department code 1 Press [PRINT COUNTER]. The PRINT COUNTER screen for the specified department code is displayed. 2 Select the button of the counter you want to check. (Only for color print models) The displayed items differ between the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 139
    3.MANAGING COUNTERS (COUNTER MENU) 3 MANAGING COUNTERS (COUNTER MENU) 2 Select the button of the counter you want to check. Displaying fax communications counter for department code 1 Press [FAX COMMUNICATION]. The FAX COMMUNICATION screen for the specified department code is displayed.
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 140
    3 MANAGING COUNTERS (COUNTER MENU) DEPARTMENT MANAGEMENT „ Logging on as administrator You can define department codes to control the quantity of copy, print, scan, and facsimile pages printed by each department code. You can register up to 1000 department codes (up to 50 department codes when the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 141
    3.MANAGING COUNTERS (COUNTER MENU) 5 Continue with the operation that you require. 3 MANAGING COUNTERS (COUNTER MENU) P.140 "Printing the department code list" P.140 "Enabling department codes" P.141 "Registering a new department code" P.143 "Editing department codes" P.145 "Deleting department
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 142
    department code has not been entered. For instructions on how to set the Department Code Enforcement, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page". y The Department Management function does not support Web Services Scan. Web Services Scan jobs performed when this function is
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 143
    . P.140 "Enabling department codes" 1 On the DEPT. MANAGEMENT menu screen, press [DEPARTMENT REGISTRATION]. The DEPARTMENT CODE screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press an undefined
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 144
    when it reaches "0". When a new department code is registered, the number entered in the [DEFAULT QUOTA] box is displayed in this box. You can manually change the number displayed in this box to a desired value. y DEFAULT QUOTA - Enter the initial quota for this department code. You can enter up
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 145
    edit an existing department code. 1 On the DEPT. MANAGEMENT menu screen, press [DEPARTMENT REGISTRATION]. The DEPARTMENT CODE screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press the department
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 146
    3 MANAGING COUNTERS (COUNTER MENU) 5 Press [NEW CODE]. The on-screen keyboard is displayed. For details of the on-screen keyboard, see the following page: P.154 "On-screen keyboard" 6 Enter the new department code and press [OK]. You will be returned to the EDIT DEPARTMENT CODE screen. y You can
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 147
    an existing department code. 1 On the DEPT. MANAGEMENT menu screen, press [DEPARTMENT REGISTRATION]. The DEPARTMENT CODE screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press the department
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 148
    for the specified department code. 1 On the DEPT. MANAGEMENT menu screen, press [DEPARTMENT REGISTRATION]. The DEPARTMENT CODE screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press the department
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 149
    for each code. P.143 "Editing department codes" 1 On the DEPT. MANAGEMENT menu screen, press [ALL LIMIT]. The ALL LIMIT screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Enable or disable the All
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 150
    function cannot be enabled. 1 On the DEPT. MANAGEMENT menu screen, press [NO LIMIT BLACK]. The NO LIMIT BLACK COPY/PRINT screen is displayed. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press [ENABLE] to use the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 151
    . 1 On the DEPT. MANAGEMENT menu screen, press [SET REGISTERED QUOTA]. The message "Are you sure?" is displayed on the CONFIRMATION screen. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press [YES]. The quotas
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 152
    counter. 1 On the DEPT. MANAGEMENT menu screen, press [RESET ALL COUNTERS]. The message "CLEAR OK?" is displayed on the CONFIRMATION screen. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press [YES]. All department
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 153
    department codes. 1 On the DEPT. MANAGEMENT menu screen, press [DELETE ALL]. The message "Delete OK?" is displayed on the CONFIRMATION screen. For instructions on how to display the DEPT. MANAGEMENT menu screen, see the following page: P.138 "Logging on as administrator" 2 Press [YES]. All
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 154
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 155
    APPENDIX 4. Setting Letters ...154 On-screen keyboard...154 On-screen numeric keypad ...155 List Print Format...156 TOTAL COUNTER LIST...156 DEPARTMENT CODE LIST ...157 ADDRESS BOOK INFORMATION...158 GROUP NUMBER INFORMATION...159 FUNCTION LIST (User) ...160 NIC configuration page...161 FUNCTION
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 156
    4 APPENDIX Setting Letters Whenever a character string or fax number needs to be entered, an on-screen keyboard is displayed. Enter the characters or digits by touching the button on the screen. Digits can also be entered from the digital keys on the control panel. When you press [OK] after
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 157
    , be sure the "keyboard layout" setting in the ADMIN menu is suitable with the connected keyboard. P.76 "Changing the keyboard layout" The supported keyboards are as follows: y 101 keyboard (QWERTY layout) y 102/105 keyboard (QWERTZ layout) y 102/105 keyboard (AZERTY layout) There is no guarantee
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 158
    4 APPENDIX List Print Format „ TOTAL COUNTER LIST Output example of TOTAL COUNTER LIST (The contents are partly different between color and monochromatic models.) TOTAL COUNTER LIST 2011-05-10 15:18 S/N:CME000034 XXXXXXXX XXXXXXXXXX FIN S/N:FIN S/N- TOTAL :9999 DF TOTAL :9999 PRINT COUNTER TOTAL
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 159
    4.APPENDIX 4 APPENDIX „ DEPARTMENT CODE LIST Output example of DEPARTMENT CODE LIST (The contents are partly different between color and monochromatic models.) DEPARTMENT CODE LIST TIME : 2011-05-10 10:53 DEPT NO. D 1 DEPARTMENT 01 QUOTA 999.00 PRINT COUNTER FULL COLOR COPY SMALL 99999
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 160
    4 APPENDIX „ ADDRESS BOOK INFORMATION Output example of ADDRESS BOOK INFORMATION ADDRESS BOOK INFORMATION NO. NAME 001 User01 002 User02 003 User03 004 User04 005 User05 006 User06 007 User07 008 User08 009 User09 010 User10 011 User11 012 User12 FAX NUMBER/E-MAIL
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 161
    4.APPENDIX „ GROUP NUMBER INFORMATION Output example of GROUP NUMBER INFORMATION 4 APPENDIX GROUP NUMBER INFORMATION TIME FAX NO.1 FAX NO.2 NAME : 2011-05-10 20:47 : 99999999999 : 99999999990 : MFP_00000183 NO. NAME 001 Group01 002 Group02 003 Group03 ADDRESS BOOK 001 001 002 003 004
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 162
    BYPASS FEED ORIGINAL MODE FOR COLOR ORIGINAL MODE FOR BLACK ORIGINAL MODE FOR AUTO COLOR OMIT BLANK PAGE ADJUSTMENT ACS ADJUSTMENT : MANUAL : AUTO : BLACK : DISABLE : PLAIN : TEXT/PHOTO : TEXT/PHOTO : TEXT/PHOTO : 0 : 2 SCAN COLOR MODE COMPRESS B/W ADJUSTMENT IN ACS ROTATION SINGLE/2-SIDED SCAN
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 163
    No Version Network Address Network Topology Connector Network Mode Novell Network Information Print Server Name Password Defined Search Root Directory Services Tree Directory Service Context Scan Rate Frame Type TCP/IP Network Information for IPv4 Address Mode The serial No. of this equipment The
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 164
    4 APPENDIX IP Address Subnet Mask Default Gateway Primary DNS Server DNS Name Host Name Primary WINS Server NetBIOS Name IPP Network Information IPP without SSL IPP with SSL AppleTalk Network Information AppleTalk Printer Name AppleTalk Zone AppleTalk Type Novell Connection Information File System
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 165
    4.APPENDIX 4 APPENDIX „ FUNCTION LIST (Administrator) Output example of FUNCTION LIST (Administrator) (The contents are partly different between color and monochromatic models.) FUNCTION LIST S/N F/W Ver. M-ROM Ver. S-ROM Ver. : CME000034 : XXXXXXXXXXXX : 140M-015 : 140S-01 TIME FAX NO.1 FAX NO
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 166
    the Internet Fax transmission is enabled or disabled. Shows whether the fax transmission is enabled or disabled. Shows whether the Web Scan Service is enabled or disabled. Shows whether the TWAIN scanning function is enabled or disabled. Shows whether the scanning function to external controllers
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 167
    4.APPENDIX 4 APPENDIX GENERAL Function Description FUNCTIONS - NETWORK INTERNET FAX Shows whether the network Internet fax function is enabled or disabled. JOB SKIP CONTROL - ENABLE JOB SKIP CONTROL Shows whether the Job Skip Control is enabled or disabled. ADDRESS BOOK RESTRICTION BY ADMIN
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 168
    WASTE HOLE PUNCH TRAY FULL ORIGINAL OUTSIDE ERASE *1 Printed only for color models. *2 Printed only for monochromatic models. *3 Printed only for models supporting copy to tab paper. SCAN Function COLOR MODE COMPRESS B/W ADJUSTMENT IN ACS ROTATION SINGLE/2-SIDED SCAN IMAGE QUALITY FOR BLACK PREVIEW
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 169
    4.APPENDIX SCAN Function BLACK - RESOLUTION BLACK - ORIGINAL MODE BLACK - EXPOSURE BLACK - BACKGROUND ADJUSTMENT *1 Printed only for color models. FAX Function FAX ROM VERSION RESOLUTION ORIGINAL MODE EXPOSURE TX TYPE *1 TTI RTI ECM *1 PREVIEW SETTING *3 INITIAL PREVIEW TYPE *3 INITIAL SETUP -
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 170
    4 APPENDIX FAX Function Description RECOVERY TX - STORED TIME *1 Shows how many hours a recovery transmission job is to be stored. FAX RECEIVED FORWARD - AGENT1 *1 Shows the agent type if the Fax Received Forward is registered. FAX RECEIVED FORWARD - AGENT2 *1 Shows the agent type if the
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 171
    4.APPENDIX E-MAIL Function DEFAULT SUBJECT INTERNET FAX Function FRAGMENT PAGE SIZE (KB) BODY STRING TRANSMISSION FROM ADDRESS FROM NAME NUMBER OF RETRY RETRY INTERVAL INTERNET FAX RECEIVED FORWARD - AGENT1 INTERNET FAX RECEIVED FORWARD - AGENT2 REPORT SETTING Function JOURNAL - AUTO JOURNAL - TX
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 172
    4 APPENDIX PRINTER/E-FILING Function AUTOMATIC CHANGE OF PAPER SOURCE PAPER OF DIFFERENT DIRECTION ENFORCEMENT CONTINUE OF ILLEGAL PAPER AUTO STACKER CHANGE (CASCADE PRINT) SUSPEND PRINTING IF STAPLER EMPTY WASTE HOLE PUNCH TRAY FULL WIRED 802.1X SETTING Function ENABLE 802.1X EAP-METHOD WIRELESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 173
    4.APPENDIX NETWORK SETTING - NETWORK - IPv6 Function IP ADDRESS PREFIX LENGTH DEFAULT GATEWAY USE DHCPv6 SERVER FOR OPTIONS USE STATELESS FOR IP ADDRESS (M FLAGS) USE STATELESS FOR OPTIONS (O FLAGS) IP ADDRESS1 PREFIX LENGTH1 DEFAULT GATEWAY1 IP ADDRESS2 PREFIX LENGTH2 DEFAULT GATEWAY2 IP ADDRESS3
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 174
    4 APPENDIX NETWORK SETTING - NETWORK - APPLETALK Function Description ENABLE APPLE TALK Shows whether the AppleTalk protocol is enabled or disabled. DEVICE NAME Shows the AppleTalk device name. DESIRED ZONE Shows the AppleTalk zone. NETWORK SETTING - SESSION - LDAP SESSION Function
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 175
    Bonjour is enabled or disabled. LINK-LOCAL HOST NAME Shows the link-local host name of this equipment for Bonjour. SERVICE NAME Shows the service name of this equipment for Bonjour. NETWORK SETTING - SESSION - LLTD SESSION Function Description ENABLE LLTD Shows whether the LLTD (Link
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 176
    IP security function is enabled or disabled. POLICY NAME Shows the policy name used for the IP security function. NETWORK SETTING - NETWORK SERVICE - POP3 NETWORK SERVICE Function Description ENABLE POP3 CLIENT Shows whether the POP3 client is enabled or disabled. User NO NO NO NO NO User NO
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 177
    or disabled. SSL PORT NUMBER Shows the SSL port number to be used for accessing the POP3 server. NETWORK SETTING - NETWORK SERVICE - FTP CLIENT NETWORK SERVICE Function Description SSL SETTING Shows the status of the FTP SSL setting. DEFAULT PORT NUMBER Shows the default port number to be
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 178
    1. IP TRAP COMMUNITY Shows the IP Trap community name. IPX TRAP ADDRESS Shows the IPX trap address. NETWORK SETTING - NETWORK SERVICE - SNTP SERVICE Function Description ENABLE SNTP Shows whether SNTP is enabled or disabled. PRIMARY SNTP ADDRESS Shows the primary SNTP server address if it
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 179
    NUMBER Shows the SSL port number to be used for IPP printing. SSL URL Shows the SSL URL for IPP printing. NETWORK SETTING - PRINT SERVICE SETTING - FTP PRINT Function Description ENABLE FTP PRINT Shows whether FTP printing is enabled or disabled. PRINT USER NAME Shows the user name for
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 180
    4 APPENDIX NETWORK SETTING - PRINT SERVICE SETTING - E-MAIL PRINT Function Description ENABLE PARTIAL E-MAIL Shows whether the equipment allows printing an e-mail job that is partially received. PARTIAL WAIT TIME Shows
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 181
    4.APPENDIX 4 APPENDIX SECURITY SETTING - AUTHENTICATION - EMAIL AUTHENTICATION SETTING Function Description EMAIL AUTHENTICATION Shows whether the E-mail authentication is enabled or disabled. SECURITY SETTING - AUTHENTICATION - EMAIL ADDRESS SETTING Function Description FROM ADDRESS
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 182
    4 APPENDIX SECURITY SETTING - PASSWORD POLICY - POLICY FOR E-FILING, TEMPLATE GROUPS, TEMPLATES, SECURE PDF, SNMP V3, CLONING, SECURE RECEIVE Function Description User MINIMUM PASSWORD LENGTH Shows the minimum password length to be allowed. NO REQUIREMENTS FOR APPLY Shows the characters to
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 183
    4.APPENDIX „ PS font list Output example of the PS Font List 4 APPENDIX List Print Format 181
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 184
    4 APPENDIX „ PCL font list Output example of the PCL Font List 182 List Print Format
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 185
    100, 102 BODY STRING TRANSMISSION 100, 102 C CALIBRATION 58, 59 CHANGE USER PASSWORD 43, 121 Changing the administrator password and resetting the service password 52 Changing the date and time 53 Changing the date format 54 Changing the display language 9 Changing the keyboard layout 76
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 186
    82, 84 J JOB SKIP CONTROL 75 K KEYWORD 21 L LAST NAME 21 LEFT TRAY (LCF) PAPER EMPTY MESSAGE 60 LINE ART 16 Link Local Address 81, 82, 84 LIST 17 List ID number 38 SECONDARY PORT NUMBER 90 SECURITY 103 SERVICE PHONE NUMBER 50 Setting IEEE 802.1X authentication 123 Setting IPsec (IP security 93
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 187
    82 Setting the IPv6 protocol manually 81 Setting the IPX/SPX protocol 86 Setting the LDAP services and the filtering functions SLEEP 57 SUSPEND PRINTING IF STAPLER EMPTY ........ 96, 118 T TAB EXTENSION 12 TONER NEAR EMPTY MESSAGE 60 TOTAL COUNTER 130 TOTAL COUNTER LIST 156 TRAY 18 TRAY SET
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 188
    186 INDEX
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 189
    ES9455 MFP ES9465 MFP/ES9475 MFP
  • Oki ES9465 | ES9465/ES9475 MFP Management Guide - Page 190
    Oki Data Corporation 4-11-22 Shibaura, Minato-ku,Tokyo 108-8551, Japan www.okiprintingsolutions.com 45686051EE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS /
MULTIFUNCTIONAL DIGITAL SYSTEMS
MFP Management Guide
ES9455 MFP
ES9465 MFP/ES9475 MFP