Oki ES9465 ES9465/ES9475 Safety Information - Page 16

1.GENERAL PRECAUTIONS Before moving the equipment with the Desk installed, remove the front stabilizer. Be sure to reinstall it after the equipment has been moved. Removing the stabilizer Installing the stabilizer Do not install the equipment by yourself or try to move it once it has been installed. This could result in an injury or damage to the device. Contact your service representative if the equipment needs to be installed or moved. ‰ Other points y If there is insufficient space around the equipment, the poor ventilation will result in malfunction, also some operations such as Feeding from MPT and releasing paper misfeeds may become difficult. To ensure adequate space, follow the table below as a guide. Model Rear Adequate space Left Right ES9455 MFP ES9465 MFP ES9475 MFP 20 cm (7.9") 30 cm (11.8") 80 cm (31.5") y Be sure to fix the power cable securely so that no one trips over it. y Adverse environmental conditions may affect the safe operation and performance of the Multifunctional Digital Systems, and the Multifunctional Digital Systems could break down. - Avoid locations near windows or with exposure to direct sunlight. - Avoid locations with drastic temperature fluctuations. - Avoid too much dust. - Avoid locations that suffer from vibration. y Make sure that the air is able to flow freely and that there is sufficient ventilation. Without adequate ventilation, the unpleasant odor released by ozone will begin to dominate the atmosphere. General Precautions 13