Oki GL408e GL408e/GL412e - LAN Card Install Guide - Page 9

LAN Card Installation Guide Menu screen Gateway Address XXX.XXX.XXX.XXX MAC Address XXX.XXX.XXX.XXX DHCP Disable* What the options mean Allows the Gateway Address to be set for the TCP/IP protocol in four three-digit segments (SEG1 through SEG4). If the Gateway Address is assigned by Bootp, ARP, or DHCP, it is dynamic and read only. The defaults for the SEG1 through SEG4 are 000, 000, 000, and 000. Note: When changing the Gateway Address, the printer resets the NIC when the printer is place online. When the printer resets the NIC, the LCD displays DO NOT POWER OFF. After the NIC has completed its initialization, the LCD displays E-NET INIT to signal that the NIC and printer are in the initialization process. When both the NIC and printer have completed initialization, the LCD displays E-NET READY. This is an informational screen that displays the manufacturer's assigned number. This number is unique for each NIC. Allows the DHCP protocol to be enabled or disabled through this menu. The factory default is Disable. Note: Consult with your systems administrator for the appropriate setting. Once the LAN settings are correct for your requirements, the installation of the LAN interface can be considered complete. 9