Oki LP470s LP470 LP480 Battery Installation Instructions (English, Fran - Page 1
Oki LP470s Manual
View all Oki LP470s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Instructions Battery Pack 1 Bloc-pile 2 Pila 3 Bateria 4 Cautions • Never try to take apart the battery pack or modify it in any way. • Never expose the battery to direct heat or fire, or take any actions that may lead to physical damage. • When charging the battery pack, be sure to use the printer or the specified battery charger. • Use only specified replacement battery packs. • Dispose of the battery in accordance with local regulatons. Do not place the battery pack together with other batteries such as dry batteries. WARNING Do not use wet hands to replace the battery pack. Doing so increases the risk of electric shock. Removing the Used Battery Pack Important! Remove the battery pack only when the printer is turned off. Do not remove the battery while the STATUS LED is on. Otherwise, the information stored in the printer may not be updated. 1. Press the POWER button to turn the printer off. POWER PRINT FEED 3. Push aside the gray latch (1) in the compartment and pull out the battery (2). Installing the New Battery Pack Caution: Make sure to install the pack in the correct direction to avoid the danger of injury or damage to surrounding areas. 1. Align the battery pack so that its metal terminals (1) are facing the printer and the tab (2) on the battery is up, then insert the battery until it snaps in place. 2. Turn the printer upside down and open the battery cover. 2. Close the battery cover and turn the printer on. English