Oki MB260MFP MB260 MFP, MB280 MFP, MB290 MFP Safety, Warranty and Regulatory I - Page 8

Reactivity Data, Preventive Measures, User´s Responsibility, Preparation Date of MSDS

Page 8 highlights

demonstrate a association between toner exposure and tumor development in rats. Exposure Limits: Not available. Irritancy Eye Irritation: Not available. Skin Irritant: Non Irritant (PII = 0.0) Sensitivity, Acute Allergenic Effects: Non skin sensitive (did not produce evidence of skin sensitization). Carcinogenicity IARC: Carbon Black, Group 2B, "Possible Carcinogen." NTP: Not available. OSHA: Carbon black is designated hazardous according to OSHA 29 CFR 1910.1200. Reproductive Toxicity: Not available. Teratogenicity: Not available. Mutagenicity: Negative (Ames test). Name of Toxicoligically Synergistic Products: Not available. Reactivity Data Stability: Stable under normal use. Conditions to Avoid: Not applicable in normal use. Polymerization: None. Hazardous Decomposition or Byproducts: Will not occur. Incompatibility: None under normal use. Preventive Measures Personal Protective Equipment Respiratory Protection: Not required in normal use. Do not handle where wind blows. Minimize breathing dust. Protective Gloves and/or Eye Protection: Not required in normal use. Flying powder may enter eyes. Engineering Controls Ventilation: None required under normal use. Other Protective Equipment and/or Hygienic Practices: None. Spill Cleanup Small Spills 1. Remove sources of ignition. 2. Carefully clean up the spill with a wet cloth, avoiding inhalation of fine dust. Large Spills 1. Remove sources of ignition and keep unnecessary and unprotected personnel away from area. 2. Wear protective gear: respirator, rubber gloves, safety goggles. 3. Vacuum the spill using a vacuum equipped with a HEPA filter, then wipe up remainder with a wet cloth. Vacuum should be electrically bonded and grounded to dispel electricity. 4. Remove residue with soap and cool water. Waste Disposal Follow appropriate federal, state and local regulations. Do not incinerate. Precautions Precautions for Handling or Storage: Keep container closed. Do not handle in areas where wind blows. Flying powder may enter eyes. Minimize breathing dust. Avoid direct sunlight. Store at temperature below 35°C (95°F). Keep out of reach of children. Other Precautions: None. Shipping Information Special Shipping Information: Avoid direct sunlight. Do not keep at temperatures above 35°C (95°F). UN Classification: Not applicable. User's Responsibility This bulletin cannot cover all possible situations which the user may experience when using this product. Each aspect of your operation must be examined in regard to if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin must be provided to your employees or customers. It is your responsibility to use this information to develop appropriate work practice guidelines and employee instructional programs for your operation. Preparation Date of MSDS Date: March 2, 2009. Prepared by: Oki Data Americas, Inc Engineering Services Department. 2000 Bishops Gate Blvd. Mt. Laurel, NJ 08054-4620 Tel: (856) 235-2600 Fax: (856) 222-5320 www.okiprintingsolutions.com 8 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8 - English
demonstrate a association between toner exposure and
tumor development in rats.
Exposure Limits:
Not available.
Irritancy
Eye Irritation:
Not available.
Skin Irritant:
Non Irritant (PII = 0.0)
Sensitivity, Acute Allergenic Effects:
Non skin
sensitive (did not produce evidence of skin
sensitization).
Carcinogenicity
IARC:
Carbon Black, Group 2B, "Possible Carcinogen."
NTP:
Not available.
OSHA:
Carbon black is designated hazardous according
to OSHA 29 CFR 1910.1200.
Reproductive Toxicity:
Not available.
Teratogenicity:
Not available.
Mutagenicity:
Negative (Ames test).
Name of Toxicoligically Synergistic Products:
Not
available.
Reactivity Data
Stability:
Stable under normal use.
Conditions to Avoid:
Not applicable in normal use.
Polymerization:
None.
Hazardous Decomposition or Byproducts:
Will not
occur.
Incompatibility:
None under normal use.
Preventive Measures
Personal Protective Equipment
Respiratory Protection:
Not required in normal use.
Do not handle where wind blows. Minimize breathing
dust.
Protective Gloves and/or Eye Protection:
Not
required in normal use. Flying powder may enter eyes.
Engineering Controls
Ventilation:
None required under normal use.
Other Protective Equipment and/or Hygienic
Practices:
None.
Spill Cleanup
Small Spills
1.
Remove sources of ignition.
2.
Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1.
Remove sources of ignition and keep unnecessary
and unprotected personnel away from area.
2.
Wear protective gear: respirator, rubber gloves,
safety goggles.
3.
Vacuum the spill using a vacuum equipped with a
HEPA filter, then wipe up remainder with a wet cloth.
Vacuum should be electrically bonded and grounded
to dispel electricity.
4.
Remove residue with soap and
cool
water.
Waste Disposal
Follow appropriate federal, state and local regulations. Do
not incinerate.
Precautions
Precautions for Handling or Storage:
Keep container closed.
Do not handle in areas where wind blows.
Flying powder may enter eyes.
Minimize breathing dust.
Avoid direct sunlight.
Store at temperature below 35¸C (95¸F).
Keep out of reach of children.
Other Precautions:
None.
Shipping Information
Special Shipping Information:
Avoid direct sunlight.
Do not keep at temperatures above 35¸C (95¸F).
UN Classification:
Not applicable.
User´s Responsibility
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each
aspect of your operation must be examined in regard to if,
or where, additional precautions may be necessary. All
health and safety information contained in this bulletin
must be provided to your employees or customers. It is
your responsibility to use this information to develop
appropriate work practice guidelines and employee
instructional programs for your operation.
Preparation Date of MSDS
Date:
March 2, 2009.
Prepared by:
Oki Data Americas, Inc
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
www.okiprintingsolutions.com