Oki MC160MFP Network Guide - Page 14
Tcp/ip, Ip Addr. Setting
![]() |
View all Oki MC160MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TCP/IP Purpose Options Default Enables or disables TCP/IP. If ENABLE is selected, TCP/IP is enabled. If DISABLE is selected, TCP/IP is disabled. DISABLE/ENABLE ENABLE IP ADDR. SETTING Purpose Options Default Range Notes Sets the IP address of this machine on the network. Sets the subnet mask of the network. The subnet mask allows you to limit access to your machine (for example, according to departmental divisions). Sets the address of the router/gateway when a router/gateway is used on your network and you allow users outside your network environment to print on your machine. AUTO/SPECIFY AUTO (If IP ADDR. SETTING is set to SPECIFY) IP ADDRESS: 0.0.0.0 SUBNET MASK: 255.255.255.0 GATEWAY: 0.0.0.0 (If IP ADDR. SETTING is set to SPECIFY) 0-255 for each xxx triplet Use the keypad to input each number; use the and keys to move between triplets. A single digit number, such as "1", cannot be input as "001". Align the number on the left and input "1" as "1 _ _". Use the and keys to move between triplets. The BACK key can also be used for deleting. To cancel IP Address menu, hold down the BACK key for more than one second, and then press the BACK key again after all settings have been cleared. 1-8 NETWORK SETTING Menu
![](/manual_guide/products/oki-data-mc160mfp-network-guide-8767fac/14.png)