Oki MICROLINE 320 TURBO OkiLAN 6020e? Pocket Print Server Userfs Guide - Page 157
IBM's AIX ver. 3.x for Printing with the, OkiLAN 6020e
View all Oki MICROLINE 320 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Section 4 - Appendix B - Application Considerations IBM's AIX ver. 3.x for Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on IBM's AIX version 3.x of the UNIX operating system. The following specific names will be used to represent general devices or concepts. • lj4 - The local queue name on the AIX system to which print jobs that are destined for a printer attached to the OkiLAN 6020e will be directed. • OKIPRINTER - The host name of the remote system which is the OkiLAN 6020e. For example, to telnet to the OkiLAN 6020e and invoke the OkiLAN 6020e Configuration utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6020e, the IP Address may be used. • yourqueuename - This is the name of the queue on the OkiLAN 6020e and must end with 1 or 2, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages IV-15 and IV-16 for more information on remote queue names. Prerequisites Before you proceed, the name OKIPRINTER and the IP address assigned to the OkiLAN 6020e should be in the "/etc/hosts" file on the AIX system. Procedure To configure the AIX machine so that users can spool print jobs to the pcl2 print queue on the OkiLAN 6020e named OKIPRINTER, do the following: 1. Login to the AIX machine as root. 2. Invoke the SMIT utility by typing: AIX> smit TCP/IP OKI OkiLAN 6020e User's Guide IV - 75