Oki MICROLINE 421 LAN7130E Users Guide - Page 13

10 Select the Ethernet address from the list, and then select the printer you want to configure. The Model Name will be displayed as "LAN7130E". Note ●● The Ethernet address is displayed in [NIC Check] in the configuration information of the network. ●● [DHCP/BOOTP protocol] is set to [ENABLE] by default. If a DHCP/BOOTP server is present on the network, the IP address obtained by the server will be displayed. ●● The printer may not be detected if firewall or other security software has been set. In this case, stop the firewall or other security software or register AdminManager as an exception and try again. For details, please refer to "If the printer cannot be detected" P.45. 11 From the [Setup] menu, select [OKI Device Setup]. 12 If the settings confirmation message appears, click on [YES]. 13 Set the IP address and click on [OK]. 14 Enter a password in the [Input Password], and click on [OK]. Note ●● The default password is the last 6 alphanumerical digits of the [Ethernet address]. ●● The password entered will be displayed as "******" on the screen. ●● The password is case sensitive. 15 If a message indicating that IP address setting is complete appears, click on [Yes]. 16 Confirm that the IP address has been set correctly, and then exit the AdminManager. Connecting to a Computer ‰‰Next, install the printer driver on the computer. 1 1. Setup ‰‰Windows 8/Server 2012 1 If the [Start] screen is displayed, click [Desktop] at the top of the screen. 2 Move the mouse cursor to the top right corner of the screen to display the charm bar, and click [Settings] > [Control Panel] in this order. (If you are using a touch-operated computer, flick the right side of the screen to display the charm bar.) 3 Click [View devices and printers]. 4 Click [Add a printer] in the [Devices and Printers] screen. 5 In the displayed screen, select the printer that corresponds to the IP address set for the printer, and click [Next]. - 13 -