Oki ML521 Users' Guide for the ML520/1 - Page 40

Paper Park Feature, Switching Paper Paths

Get Oki ML521 PDF manuals and user guides View all Oki ML521 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

4 If you have problems setting the Top of Form high enough on the page when using Forms Tear Off, see "Problem Solving." Paper Park Feature If you have continuous-form paper loaded and you wish to switch to another paper path, first tear off the printed pages, then press the PARK button. The continuous-form paper will immediately retract from the paper path. PARK PRINT Switching Paper Paths To switch to single-sheet feed: 1. Tear off any printed pages, then press PARK. 2. Swing the wire guide up into the paper separator, and swing the separator upright. 3. Move the paper lever to "TOP." 4. Load single sheet paper. To switch to continuous-form feed: 1. Press FF/LOAD to remove single sheet from paper path if needed. 2. Lower the paper separator and swing the wire guide out. 3. Move the paper lever to "REAR" or "BOT," as appropriate. 4. Press FF/LOAD. 4 When you switch paths, the printhead travels and gently fires pins to sense paper thickness and set the gap. Using Your Printer E-33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Using Your Printer
E-33
If you have problems setting the Top of Form high
enough on the page when using Forms Tear Off, see
“Problem Solving.”
Paper Park Feature
If you have continuous-form paper loaded and you wish
to switch to another paper path, first tear off the printed
pages, then press the PARK button. The continuous-form
paper will immediately retract from the paper path.
PARK
PRINT
Switching Paper Paths
To switch to single-sheet feed:
1. Tear off any printed pages, then press PARK.
2. Swing the wire guide up into the paper separator, and
swing the separator upright.
3. Move the paper lever to “TOP.”
4. Load single sheet paper.
To switch to continuous-form feed:
1. Press FF/LOAD to remove single sheet from paper
path if needed.
2. Lower the paper separator and swing the wire guide
out.
3. Move the paper lever to “REAR” or “BOT,” as appro-
priate.
4. Press FF/LOAD.
When you switch paths, the printhead travels and
gently fires pins to sense paper thickness and set the
gap.