Oki OKIPAGE10i Troy Etherwind 802.11b Print Server Users Guide - Page 37
DEC LAT Network Configuration, VMS LAT Host Configuration
View all Oki OKIPAGE10i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
8 DEC LAT Network Configuration Note: Only TROY EtherWind-N models include DEC LAT support. The EtherWind wireless print server acts as a node on an Ethernet network that offers printing services to other devices. The print server comes preconfigured to run on a LAT network and does not require any additional setup. Each print server has a default node name of XCD_xxxxxx (where "xxxxxx" are the last six digits of the Ethernet address of the unit). The port name is P1 for the EIO, MIO, or first parallel port; S1 for the first serial port, P2 for the second parallel port, and S2 for the second serial port. VMS LAT Host Configuration Use the VMS editor to create a text file with the necessary configuration commands to create a LAT application port and then a VMS print queue. For example: $MCR LATCP CREATE PORT LTAxx:/APPLICATION SET PORT LTAxx:/NODE=nodename/PORT=port SHOW PORT LTAxx: EXIT $SET TERM LTAxx:/PASSTHRU/PASSALL/TAB/NOBROADCAST/PERM $SET DEVICE/SPOOL LTAxx: $INIT/QUEUE/START/ON=LTAxx:/PROC=LATSYM queuename Note: LTAxx is the available LAT port to be used nodename is the node name of the print server port is the port, e.g. P1, S1, P2, S2 & LN queuename is any unique name for the print queue. 8-1