Oki OKIPOS 441 ParallelBlack Software Manual - Page 10
Setting up the Connection:, USB Connection
![]() |
View all Oki OKIPOS 441 ParallelBlack manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
13.Load a paper roll into the printer, and connect the printer to your computer. Note For information about how to load paper and how to connect the printer to your computer, refer to the OKIPOS 441's hardware manual. To view the manual, click Document at the Autorun menu, then select Hardware Manual from the document list. Setting up the Connection: > For USB Connection, see "USB Connection" immediately below. > For Parallel (LPT1) Connection, see "Parallel Port Connection" on page 11. USB Connection 1. Turn on the printer. The Windows plug-and-play feature detects the connection of the printer hardware and automatically installs the driver software. The Found New Hardware popup appears briefly at the bottom right of the Windows desktop to indicate that system had detected the new hardware. 2. From the Windows Start menu, select Printers and Faxes and confirm that OKIPOS 441 Cutter appears in the folder. (Note that the actual display will vary according to the specific type of printer connected.) If the printer is displayed, the installation is finished. 10 • Installing Software, Windows 2000 and Windows XP
![](/manual_guide/products/oki-data-okipos-441-parallelblack-software-manual-a4c5308/10.png)