Oki OKIPOS 441 SerialBlack Users Guide - Page 45
Parallel Interface Model, 3. USB Interface Model, 4. Ethernet Interface Model
![]() |
View all Oki OKIPOS 441 SerialBlack manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
10-2. Parallel Interface Model The parallel interface model is equipped with the main DIP switch only. 10-3. USB Interface Model The USB interface model is equipped with the main DIP switch only. 10-4. Ethernet Interface Model n Initializing Settings Set the push switch as described below to initialize the setting information. Push the switch for one to five seconds while running under normal operating mode. The green and red LEDs will flash with a regular pattern. After that, push the switch once again in that state to turn OFF both of the red and green LEDs. This will return the settings of the interface board to their default, or ex-factory, settings. After the interface board has been initialized, the printer will automatically reboot itself. n LED Display Green : Lights when other party connection is recognized as 100BASE-TX. Red : Lights when packets are received. LED Push switch - 41 -
![](/manual_guide/products/oki-data-okipos-441-parallelblack-users-guide-4146822/45.png)