Oki OKIPOS 441J LANBlack Software Manual - Page 49

Setting the Paper Size This driver supports both standard sizes and user-defined sizes. Standard Sizes The following standard sizes are supported. Setting Default Widtha Length 45 mm × 200mm 45 mm 200 mm 45mm × Receiptb 45 mm 3,000 mm 48mm × 200mm 48 mm 200 mm 48 mm × Receipt 48 mm 3,000 mm 60mm × 200mm 60 mm 200 mm 60mm × Receipt 60 mm 3,000 mm 63mm × 200 mm 63 mm 200 mm 63mm × Receipt 63 mm 3,000 mm A4 210 mm 297 mm Letter x 8.5 inches 11 inches a. The width value denotes the printable range, and should be set smaller than the actual paper size to leave room for margins. If you are using 57.5 mm-wide paper rolls, for example, you should set the width no greater than 48 mm. b. "Receipt" length denotes variable length. If you wish to carry out journal printing (without page breaks), select a Receipt-length paper size (such as 48mm×Receipt) and set the paper type (see "Setting the Paper Type" on page 28) to Receipt 49 • Windows 2000/XP/Vista Printer Driver Settings