Oki OKIPOS T410DT-Parallel Quick Guide - Page 13

Ribbon Setting

Get Oki OKIPOS T410DT-Parallel PDF manuals and user guides View all Oki OKIPOS T410DT-Parallel manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Ribbon Setting Thermal Transfer model OKI POS T400/T410 only. 1 Confirm the [PUSH] mark on the Left/Right side of the main unit. While depressing the mark on the cover, open the Top cover. 2 Press the Head Open/Close lever to the direction as shown in Figure. Confirm that the head is detached from the platen roller part, then lift the head in the direction as shown in the Figure. 3 While pressing the Ribbon Core Lock button, pull the ribbon core from the unit. * The roller is also opened. 4 Insert the ribbon core in the ribbon supply spindle on the opposite side. And insert the empty ribbon core to the ribbon rewind spindle on this side. Please confirm the direction of the roll. Insert the guide part of the ribbon core in the slot of the ribbon unit side and return the ribbon core to the unit. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Ribbon Setting
Thermal Transfer model OKI POS T400/T410 only.
1
Confirm the [PUSH] mark on the Left/Right
side of the main unit.
While depressing the mark on the cover, open
the Top cover.
2
Press the Head Open/Close lever to the
direction as shown in Figure.
Confirm that the head is detached from the
platen roller part, then lift the head in the
direction as shown in the Figure.
3
While pressing the Ribbon Core Lock
button, pull the ribbon core from the unit.
* The roller is also opened.
4
Insert the ribbon core in the ribbon supply
spindle on the opposite side.
And insert the empty ribbon core to the
ribbon rewind spindle on this side.
Please confirm the direction of the roll.
Insert the guide part of the ribbon core in the
slot of the ribbon unit side and return the
ribbon core to the unit.
11