Olympus 141923 VN-3100 Instructions (English) - Page 4
Recording
View all Olympus 141923 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Recording 1 Press the FOLDER button to select the desired folder a b 2 Press the REC button to start recording. The Record/play indicator light turns red, c and recording starts. d 3 To stop recording, press the e STOP button. a Current folder New recordings are saved as the last file b Current recording in the folder. mode c Current file number d Recording time e Remaining recording time 4 To Pause Recording To Pause Press the REC button during recording. ➥ "PAUSE" appears on the display and the record/play indicator light flashes. To Resume Recording Press the REC button again. ➥ Recording will resume at the point of interruption. 4 Recording from External Microphone or Other Devices The external microphone and other devices can be connected and the sound can be recorded. s When the external microphone is connected to the microphone jack of the recorder, the built-in microphone will not operate. s When using an external microphone, choose adequate microphone, such as a Noise-Cancellation microphone or Electret condenser microphone (optional). s When connecting an external equipment, use the connecting cord KA333 (optional). A audio input terminal of other devices Notes s If "FULL" appears on the display, you cannot record in the selected folder. In such a case, erase unnecessary files or download to PC (VN-1100PC/VN-2100PC/VN-3100PC/VN-4100PC). s If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations. Put a notebook or other item between the table and the recorder so that the vibration is not easily transmitted for clearer recording. s Even if you press the DISPLAY button, the display will not change to current recording time if the remaining recording time is 5 minutes or less. s When remaining recording time falls to 1 minute or less, the Record/play indicator light flashes red. s The recorder will enter Stop mode if it has been left paused for 60 minutes or longer. s In case of difficult acoustic conditions or low speaker's voice, recording in XHQ or HQ is recommended. Also, usage of an external microphone (sold separately) could improve the quality of recordings. s The input level cannot be adjusted on this recorder. When you connect the recorder to an external device, execute a test recording and adjust the output level of the external device. 4 LCD Display Information You can select an option for the display of the recorder. This help review and confirm different recorder settings and file information. State of the recorder Operation Display While in stop Press and hold The total number of files recorded in the folder and mode the STOP button remaining recording time appears on the display. While in Press the record mode DISPLAY button The display switches between current recording time and remaining recording time. While in stop mode or playback mode Press the DISPLAY button Playing time → Remaining playing time → Recording date of the file → Recording time of the file → Playing time . . . - 4 -