Olympus 202049 Reference Manual - Page 25
NOT blinking, drag & drop
UPC - 050332158337
View all Olympus 202049 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3 Removing a card Before removing a card, close all software programs that are using data on the card (e. g. image viewing software), then follow the steps below. Attention! ● If you do not follow the steps below, the data on the card may be damaged. ● DO NOT apply force to the computer's USB port or the adapter when removing/inserting a card from/into the adapter if it is directly connected to the computer's USB port. 1. Drag & drop the card's icon onto the Trash icon. Drag & Drop To perform a drag and drop, press and hold the mouse button over the selected file(s), then move the mouse (drag) to the desired location and release the button to copy (drop). 2. Make sure that the status lamp is NOT blinking. 3. Pull the card out of the card slot as shown. Pull the card out. Notes • NEVER pull the card out of the card slot or unplug the adapter from the computer while the status lamp is blinking. Doing so may destroy the data on the card or the card itself, or cause the computer to malfunction. Status lamp 4 Disconnecting the adapter Before disconnecting the adapter from the computer, close all software programs that are using data on the card (e. g. image viewing software), then follow the steps below. 1. If a card is inserted in the adapter, drag & drop the card's icon onto the Trash icon. 2. Make sure that the status lamp is NOT blinking. 3. Unplug the adapter from the computer's USB port. ● You can unplug the adapter with the computer's power on. (You do not need to turn off the computer, restart it, or put it in the sleep mode.) 25