Olympus 5050 C-5050 Zoom Basic Manual (12 MB) - Page 33

• The available settings vary depending on the mode. Note J IF CORRECT FOCUS CANNOT BE OBTAINED (FOCUS LOCK) When the subject you want to focus on is not in the center of the frame and you cannot position the AF target mark on it, you can focus the camera on another point at roughly the same distance (focus lock) and take the picture as explained below. 1 Set the mode dial to and turn the camera on. 2 Position the AF target mark on the subject you want to focus En on. • When shooting a hard-to-focus subject or a fast-moving subject, point the camera at an object about the same distance away as the subject. 3 Press the shutter button AF target mark Green lamp halfway until the green lamp lights • When the focus and exposure are locked, the green lamp lights. • If the monitor is turned on, the AF target mark moves to the focused position. • When the green lamp blinks, the focus and exposure are not locked. Release your finger from the shutter button, re-position your subject and press the shutter button halfway again. 4 Keeping the shutter button pressed halfway, recompose your shot. 5 Press the shutter button fully. En 33