Olympus 850SW Stylus 850 SW Instruction Manual (English) - Page 47
Connecting the camera to a computer
UPC - 050332164024
View all Olympus 850SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Note • Use a computer with a pre-installed operating system. Operations are not guaranteed on home-built computers or computers with an updated operating system. • Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port. • To install the software, you must log on as a user with administrators' privileges. • If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. • Disconnect the cable connecting the camera to the computer • Turn off the camera • Open the camera's battery/card compartment cover For how to install the OLYMPUS Master software, refer to the installation guide included in the CD-ROM. Connecting the camera to a computer 1 Make sure the camera is turned off. • The monitor is off. • The lens cover is closed. Using OLYMPUS Master 2 Connect the multi-connector on the camera to the USB port on the computer using the provided USB cable. • Refer to your computer's instruction manual to locate the position of the USB port. • The camera turns on automatically. • The monitor turns on and the selection screen for the USB connection is displayed. Monitor Connector cover 3 Select [PC], and press o. Multi-connector USB PC EASY PRINT CUSTOM PRINT EXIT SET OK EN 47