Olympus D-370 D-370 Basic Manual (4.8 MB) - Page 16

I WHITE BALANCE This camera uses automatic white balance to shoot the subject in a naturallooking tone. However, it may sometimes be difficult to get satisfactory results automatically due to lighting or weather conditions. In such cases, change the white balance settings. 1 Press the button with the lens barrier open. 2 Select [PICTURE] from the Camera menu screen using the / buttons and press the button. 3 Select [ ] using the / buttons and press the button. 4 Select the white balance setting and press the button. Tne white balance is now set. Press the button again to exit the menu. 5 Take the picture. You can continue taking photos with the selected white balance setting. Close the lens barrier to cancel the white balance setting. White balance settings Auto (no display) : Automatically adjusts the white balance to ensure natural colors (default setting). Daylight ( ) : Ensures natural colors outside in full daylight (sunny weather). Cloudy ( ) : Ensures natural colors outside in overcast daylight (cloudy weather). Tungsten Light ( ) : Ensures natural colors in tungsten light. Fluorescent Light ( ) : Ensures natural colors in fluorescent light. Note • The white balance setting will return to [AUTO] (default setting) when the lens barrier is closed. • Natural colors are hard to obtain under a mixture of artificial and natural lighting or under fluorescent lights, etc. • Select [ ] to obtain colors close to those under tungsten light. Caution • The white balance may not function under special lighting. • Check that the setting is the optimum setting by displaying the image on the monitor and checking the colors. • To determine if the selected setting is the best choice, always check the recorded image by playing it back on the camera's monitor. 16 En #BTJD Page 16 5/22/01, 6:12 PM "EPCF
1BHF.BLFS
+11$