Olympus D-575 Zoom D-575 Zoom Basic Manual (English - 6.9MB) - Page 42
Error Codes - problems
![]() |
View all Olympus D-575 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
x215_Basic.book 42 ERROR CODES Monitor indication Possible cause Corrective action NO CARD The card is not inserted, or it cannot be recognized. Insert a card or insert a different card. If the problem persists, format the card. If the card cannot be formatted, it cannot be used. CARD ERROR There is a problem with the card. This card cannot be used. Insert a new card. WRITEPROTECT Writing to the card is prohibited. Read-only setting is applied to the card by a PC. Cancel the setting using the PC. The card is full. No more Replace the card or erase En pictures can be taken or no unwanted pictures. Before CARD FULL more information such as print erasing, download important reservation can be recorded. images to a PC. NO PICTURE There are no pictures on the card. The card contains no pictures. Record pictures. PICTURE ERROR The selected picture has a problem, therefore it cannot be played back on this camera. The card cover is open. Use image processing software to view the picture on a PC. If that cannot be done, the image file is damaged. Close the card cover. CARD-COVER OPEN CARD SEtUP POWER OFF FORMAt SELECt GO The card is not formatted. Format the card. All data on the card is deleted. 42 En
![](/manual_guide/products/olympus-d575-zoom-d575-zoom-basic-manual-english-69mb-56f99c9/42.png)