Olympus D-600L D-500/D-600L Instruction Manual (English, Français, Es - Page 164
Macintosh only Turn off AppleTalk/LocalTalk., compartment cover, then press the Power button. P.
View all Olympus D-600L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
164 E When the camera is connected to a computer, an error message appears while data is being transferred to the computer. 1 The cable is not plugged in correctly. [ Connect the cable correctly. (P. 150) 2 The power is OFF. [ Press the power button to turn it ON. (P. 106) 3 The batteries are exhausted. [ Replace the batteries with new ones (P. 50) or use the optional AC adapter (P. 54). 4 The serial port is not selected correctly. [ Use the operating system software to see if the serial port is selected correctly. (P. 150) 5 There is no available serial port. [ Make one available by following the PC's instructions. [ (Macintosh only) Turn off AppleTalk/LocalTalk. 6 The image transfer speed is not selected correctly. [ Select the right speed on the computer. 7 TWAIN/Plug-In is not installed. [ Install TWAIN/Plug-In on your computer. * When no operations can be performed by pressing any buttons, push the Reset button in the Card compartment cover, then press the Power button. (P. 58)