Olympus D150 D-150/C-1 Zoom Quick Start Guide (324KB) - Page 2
Checking the Package Contents, Shooting Pictures, Using the Flash, Attaching the Provided Strap - manual
View all Olympus D150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Checking the Package Contents First make sure that all the provided accessories listed below are included in the package. If anything is missing or damaged, contact your local Olympus representative immediately. Camera CD-ROM CR-V3 lithium battery pack Strap Video cable USB cable SmartMedia Instructions Basic Manual/Warranty/Registration Card (North America only)/Authorized Distributors List/Sefety Precautions/ Battery Handling/Quick Start Guide (this publication) SmartMedia (8 MB) Static-free case for SmartMedia Labels for SmartMedia (2 pieces) Write-protect seals for SmartMedia (4 pieces) Attaching the Provided Strap Loading the Battery and Card (SmartMedia) 1. Make sure the lens barrier is closed. Card cover Lens barrier Battery compartment cover If the lens barrier is open, slide it to the closed position. Push down the flash to lock it in place. 2. Slide the battery compartment cover in the direction of the arrow q, and lift the cover in the direction of the arrow w. 3. Insert the battery in the direction shown in the figure. 5. Open the card cover. 6. Insert the card as far as it will go in the direction shown in the figure. The insertion direction is indicated on the seal inside the card cover. 4. Close the battery compartment cover in the direction of the arrow q, and press the cover in the direction of the arrow w until it clicks. Insert the card completely until a slight click is heard and the card is locked in place. 7. Close the card cover until it clicks. Shooting Pictures 1. Open the lens barrier. Slide the lens barrier until the flash pops up; the camera will turn on and the lens will come out. Lens barrier 2. Hold the camera, and look through the viewfinder. 3. Press the shutter button halfway (half-press) to make sure the green lamp on the right of the viewfinder lights. When lights: When blinking: The subject is in focus. You can shoot. The subject is out of focus. Hold the camera again, and half-press the shutter button. Viewfinder Green lamp 4. Press the shutter button all the way (full-press) to take the picture. The shutter is released and the picture is taken. Once the picture has been taken, it is displayed on the monitor for a short time. The flash fires automatically in low light situations (when AUTO is set). Monitor Using the Flash 1. Open the lens barrier. Slide the lens barrier until the flash pops up; the camera will turn on and the lens will come out. 2. Press the OK/menu button. The monitor shows the Shooting mode menu. Displayed menu Arrow pad 1/3 AUTO OFF DIGITAL ZOOM OFF SELECT END OK Monitor 3. Select by pressing the or arrow pad key. The default setting is Auto-Flash. 1/3 Press AUTO OK/menu button OFF DIGITAL ZOOM OFF SELECT END OK 4. Each time you press the or arrow pad key, the flash mode changes: Auto-Flash ➔ Red-Eye Reduction Flash ➔ Fill-In Flash ➔ Night Scene ➔ Flash Off. Select one of these modes. 1/3 AUTO Display changes as key is pressed. Note: For the function andDeIfGfeITctAoLf ZeaOcOhMflash mode, refer to Page 57 of the camera's Reference Manual. 5. When you have made your selection, press the OK/menu button. The desired flash mode is set.