Olympus DS-5000iD DS-5000iD Detailed Instructions (English) - Page 46

Device Lock Function Recorder access can be restricted by enabling the device lock function. Authentication via password and/or fingerprint verification (DS-5000iD only) can act as a safe guard for your data even in case the recorder is lost or left unattended. Fingerprint registry (☞ P.47) is performed by the recorder, while password registry can be performed by using DSS Player (☞ P.69). 3 F2 button OK/MENU,+, -, 9, 0 button Device Lock Function Unlocking the Recorder When the password registry and/or fingerprint registry is done, the recorder will prompt for password and/or fingerprint verifications (DS5000iD only) on startup. Unlock Device Enter Password Unlock Device Enter Password or Sweep Finger DS-5000 DS-5000iD Unlock the recorder's device lock through the method below. The default password when using the recorder 46 for the first time is "0000". Unlocking the Recorder with a Password 1 + - Select the numbers you want to enter by pressing the , , 9 or 0 button to move the cursor. Unlock Device Enter Password or Sweep Finger Entry column Cursor 2 Press the OK/MENU button to select a number. *A will appear in the selected first digit and the blinking cursor will move to the next one over (to the right). Repeat steps 1 and 2 to enter all four digits. Pressing the ERASE button at any time will erase the last entry and move the cursor to the previous entry (to the left). Unlock Device Enter Password or Sweep Finger 3 After all four digits have been entered, press the F2(ENTER) button. If the 4 digit number entered matches the registered password then the startup message will appear and the recorder will start up. Unlock Device Enter Password or Sweep Finger ENTER