Olympus E-1 E-1 Reference Manual (English) - Page 72

Auto bracketing Note ● Auto bracketing is not possible in the following cases: • When the flash is on. ● During WB bracketing, the camera cannot shoot in sequence if there is not enough memory in the camera and card for storing more than the selected number of frames. ● During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains. WB bracketing Three images with different white balances are automatically created from one shot. One is the image just taken with the specified white balance, one is the same image adjusted in the red direction, and the third the same image adjusted in the blue direction. All three images are saved on the card. 1 In the menu, select T WB BKT T OFF, 3F 2STEP, 3F 4STEP or 3F 6STEP. 5 ~ "How to use the menus" (P. 38) Exposure 2 Take a picture. ● When the shutter button is pressed down all the way, three images are automatically created. WB BKT OFF RAW JPEG 3F 2STEP NOISE FILTER 3F 4STEP 1 NOISE REDUCTION 3F 6STEP 2 SHADING COMP. CANCEL SELECT GO During WB bracketing Control panel Viewfinder During auto bracketing TIPS To apply WB bracketing to white balance you have adjusted: T Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to your white balance adjustment. 72