Olympus E-300 EVOLT E-300 Basic Manual (English) - Page 23

Power on SSWF indicator Set the power switch to ON. ● To turn off the power, set the power switch to OFF. Set the mode dial to P. P -.- - - ESP AUTO FP -.- .- ISO AUTO WB AUTO Monitor When the camera is turned on, the control panel screen is displayed on the monitor. En FOCUS S-AF AF ILLUMINATOR sRGB ~ "Advanced manual" DRIVE HQ 3264 2448 Battery check When the camera is turned on or when remaining battery power is low, the battery check mark varies. BATTERY EMPTY Lights (green) Lights*2 (red) Remaining power Remaining power level: Low. level: High*1 Charge the battery. is displayed. Remaining power level: Exhausted. Charge the battery. *1 Your digital camera's power consumption varies greatly depending on usage and operating conditions. Under some operating conditions, the camera may turn off without warning when the battery power is low. If this occurs, re-charge the battery. *2 Blinks in the viewfinder. Dust reduction function operation The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations are used to remove dust and dirt from the CCD surface. The SSWF indicator blinks while dust reduction is working. Date/time setting Images will be stored with date/time data. The date/time information is used as the basis for assigning file numbers to recorded images. ~ "Advanced manual" 23