Olympus E-510 E-510 Instruction Manual (English) - Page 78
Other function settings
UPC - 050332160446
View all Olympus E-510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Other function settings AEL/AFL memo You can lock and maintain the exposure by pressing the AEL/AFL (AE lock) button. MENU[Y][AEL/AFL MEMO] [ON] : Press the AEL/AFL button to lock and maintain the exposure. Press again to cancel the maintaining of the exposure. [OFF] : The exposure will be locked only while the AEL/AFL button is pressed. AEL metering Sets the metering mode for when pressing the AEL/AFL (AE lock) button to lock the exposure. MENU[Y][AELMetering] [AUTO]/[4]/[n]/[nHI]/[nSH] • [AUTO] performs metering in the mode selected under [METERING] mode. EV step This allows you to change the EV step for exposure parameter setting, such as shutter speed, aperture value, exposure compensation value, etc. 5 MENU[Y][EV STEP] [1/3EV]/[1/2EV]/[1EV] ISO limit Customizing the settings/functions of your camera When [ISO] is set to [AUTO], you can set the maximum ISO that is set automatically. MENU[Y][ISO LIMIT] [100]/[200]/[400] Compensating all WB This lets you apply the same compensation value to all the white balance modes at once. MENU[Y][ALL>] [ALL SET] : The same compensation value applies to all WB modes. [ALL RESET] : The WB compensation value settings applied to each WB mode are all cleared at once. If you select [ALL SET] 1) Use bd to select the color direction. R-B RedkBlue/G-M GreenkMagenta 2) Use ac to set compensate value. g "WB compensation" (P. 59) • You can check the white balance you have adjusted. If you select [ALL RESET] 1) Use ac to select [YES]. Speed synchronization You can set the shutter speed that will be used when the built-in flash fires. The speed can be set from 1/60 to 1/180. MENU[Y][#X-SYNC] [1/60] - [1/180] • For details on the synchronization speed of commercially available flashes, refer to their 78 EN manuals.