Olympus FE 370 FE-370 Instruction Manual (English) - Page 47
Date and time function - replacement screen
UPC - 050332165342
View all Olympus FE 370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
"Vertical lines appear on the screen". ● Vertical lines may appear on the screen when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. "The light is caught in the picture" ● Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. X Y M D TIME Date and time function "Date and time settings re--t-u- r-n- -t-o--th--e Y M D default setting". CANCEL MENU ● If the batteries are removed and left out of the camera for about three days*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. "Setting the date and time" (p. 13) Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message q CARD ERROR q WRITE PROTECT Corrective action Card problem Insert a new card. Card problem Use a computer to cancel the read-only setting. > Internal memory problem • Insert a card. MEMORY FULL • Erase unwanted images.*1 q CARD FULL Card problem • Replace the card. • Erase unwanted images.*1 CARD SETUP CLEAN CARD FORMAT SET OK Card problem • Use ab to select [CLEAN CARD], and press the o button. Take out the card, wipe the contact area (p. 52) with a soft, dry cloth, and then load the card again. • Use ab to select [FORMAT], and press the o button. Next, use ab to select [YES], and press the o button.*2 MEMORY SETUP IN POWER OFF MEMORY FORMAT SET OK Internal memory problem Use ab to select [MEMORY FORMAT], and press the o button. Next, use ab to select [YES], and press the o button.*2 L NO PICTURE Internal memory/Card problem Take pictures before viewing them. r PICTURE ERROR Problem with selected image Use photo retouch software, etc. to view the image on a computer. If the image still cannot be viewed, the image file is corrupted. EN 47