Olympus FE 5010 FE-5010 Instruction Manual (English) - Page 25

Select the settings for the functions while referring to "Using the Menu" (p. 3). Shooting at higher magnifications than optical zoom without reducing the image quality [FINE ZOOM] B CAMERA MENU X FINE ZOOM E: P s Submenu 2 OFF ON Application Optical zoom and digital zoom are used to zoom in for shooting. Optical zoom and image cropping are combined to zoom in for shooting (FE-5010/X-915: up to 31x, FE-5000/X-905: up to 28.5x). This function will not reduce the image quality since it dose not convert the data with fewer pixels into the data with larger pixels. When set to [ON], [IMAGE SIZE] is limited to [H] or lower. When set to [ON], digital zoom is canceled automatically. [FINE ZOOM] is not available when [% SUPER MACRO] (p. 20) is selected. Stabilizing the blurred image caused by the camera shake when shooting [IMAGE STABILIZER] (Still images)/ [DIS MOVIE MODE] (Movies) B CAMERA MENU X IMAGE STABILIZER/ DIS MOVIE MODE E: P s n Submenu 2 OFF ON Application The image stabilizer is deactivated. This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface. The image stabilizer is used for taking pictures. Images may not be stabilized if camera shake is too severe. When [DIS MOVIE MODE] (movies) is set to [ON] during shooting, the recorded images will be slightly magnified. Recording sound when shooting still images [R] B CAMERA MENU X R E: P s Submenu 2 OFF ON Application No sound is recorded. The camera automatically starts recording sound for approx. 4 seconds after a picture is taken. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 6) at the source of the sound you want to record. Selecting sound setting for movies [R] B CAMERA MENU X R E: n Submenu 2 OFF ON Application No sound is recorded. Sound is recorded. When set to [ON], only the digital zoom can be used during movie recording. To record the movie with the optical zoom, set [R] (movies) to [OFF]. The default settings are [ON] for [IMAGE STABILIZER] (still images) and [OFF] for [DIS MOVIE MODE] (movies). At very slow shutter speeds (for example when using still picture shooting mode or taking night photographs), some images may not acquire the proper stabilization effect. EN 25