Olympus P-11 Instruction Manual - Page 32
If paper is jammed
View all Olympus P-11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ENGLISH Introduction Preparation Troubleshooting If paper is jammed If paper jams in the printer, the ACCESS indicator and PAPER indicator both blink, and printing stops. Follow the steps below to clear a paper jam in the printer. 1 Turn the printer off. 2 After removing the paper tray, make sure no print paper is bent or curled and that paper is properly placed in the tray. 3 With the paper tray removed, turn the printer on again to automatically eject the paper from the printer. If paper is automatically ejected, go to Step 8. If paper is not automatically ejected, turn the printer off and go to Step 4. 4 Look through the paper tray door opening to see if there is any jammed paper visible at the back. If jammed paper is visible, go to Step 5. If jammed paper is not visible, contact your nearest Olympus service center for repairs. 5 Set the printer on its rear so that the front of the printer is facing up. Insert your finger in the paper dispenser slot located on the bottom and slide the jammed paper towards the paper tray door. If you cannot move the paper with your finger, use tweezers or the like. 32 Printing For Your Reference