Olympus TG-810 TG-810 Instruction Manual (English) - Page 14
Preparing the Camera, Inserting the battery, Charging the battery and setting up - covers
UPC - 050332177529
View all Olympus TG-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparing the Camera Inserting the battery 3 1 Battery/card/connector cover 3 1 2 3 2 1 LOCK knob Battery/card/ connector cover lock 2 When removing the battery or card, be sure to turn off the camera before opening or closing the battery/ card/connector cover. When using the camera, firmly close the battery/card/ connector cover lock and LOCK knob. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Battery lock knob Insert the battery with the B marks toward the battery lock knob as shown above. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Charging the battery and setting up using the supplied CD Connect the camera to the computer to charge the battery and use the supplied CD for setup. User registration using the supplied CD and installation of ib computer software is available on Windows computers only. The camera battery can be charged while the camera is connected to a computer. ● The indicator lamp lights during charging and turns off when charging is complete. Charging takes up to 3 hours. If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, computer, or USB cable may not be functioning as expected. 14 EN