Olympus VG-130 VG-140 Instruction Manual (English) - Page 43
volume [Sound Settings], Adjusting the brightness of the monitor
View all Olympus VG-130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
For information on using the menus, see "Using the Menu" (p. 4). Selecting the camera sound and its volume [Sound Settings] r (Settings 1) X Sound Settings Submenu 2 Sound Type q Volume Volume Submenu 3 1/2/3 OFF (No Sound) or 5 levels of volume OFF (No Sound) or 5 levels of volume Application Choose the sound made by camera controls. Adjusts the image playback volume. Choose the volume of the sound made by camera controls. Adjusting the brightness of the monitor [s] s (Settings 2) X s Submenu 2 Bright/Normal Application Selects the monitor brightness depending on the surrounding brightness. Adjusting the CCD and the image processing function [Pixel Mapping] s (Settings 2) X Pixel Mapping This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the Q button when [Start] (Submenu 2) is displayed. ● The camera checks and adjusts the CCD and the image processing function at the same time. EN 43