Olympus WS-400S WS-500M Detailed Instructions (English) - Page 40

Menu setting method Menu setting method • The start/stop actuation level also varies depending on the selected microphone sensitivity mode (☞ P.23 or P.38 ). • If the starting level is not adjusted within 2 seconds, the display will return to the previous. • If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the recording situation. • To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended. - Play Menu 4 " For WS-520M/WS-510M/ WS-500M: • When operating [Play Menu] screen, different settings items are displayed depending on the position of the mode switch. When [VOICE] mode is selected: [Noise Cancel] [Voice Filter] [Play Mode] (☞ P.41) [Play Speed] (☞ P.42) [Skip Space] (☞ P.43) When [MUSIC] mode is selected: [WOW] [Equalizer] (☞ P.41) [Play Mode] (☞ P.41) [Play Speed] (☞ P.42) [Skip Space] (☞ P.43) EN 40 " For WS-400S: [Voice Filter] [Play Mode] (☞ P.41) [Play Speed] (☞ P.42) [Skip Space] (☞ P.43) Noise Cancel If recorded audio is difficult to understand because of noisy surroundings, adjust the Noise Cancel setting level. [High] [Low]: Enables the Noise Cancel function. Noise will be reduced in the file when it's played back for better sound quality. [Off]: Disables this function. • When [Noise Cancel] is set to [Low] or [High], [Voice Filter] and slow/high speed playback functions will not function. To use these functions, set [Noise Cancel] to [Off]. Voice Filter The recorder has a Voice Filter Function to cut low and high frequency tones during normal, fast, or slow playback, and enable clear audio playback. [On]: Enables the Voice Filter function. [Off]: Disables this function. • When [Voice Filter] is set to [On], [Noise Cancel] will not function. To use this functions, set [Voice Filter] to [Off]. WOW The recorder has SRS WOW XT, an audio processing technology that increases sound clarity and bass quality. The level of the surround effect (SRS 3D) and the bass effect (TruBass) may be individually adjusted through 4 levels of processing.