Olympus ls-11 LS-11 Instructions (English) - Page 24
Press the, button to stop re, cording., Actually producing the sound you, would like to record, - pcm recorder
UPC - 798304083408
View all Olympus ls-11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Actually producing the sound you would like to record: • When a loud sound is produced the level meter will swing all the way over to the right while recording and the [PEAK] indicator light will turn on. When this happens the sound will be recorded in a distorted manner since the recording level is too high. Recording 5 Press the STOP 4 button to stop recording. • [ ] will go out on the display. e File length e 2 When the level meter is maxed out (the recorded sounds will be distorted) About Recording • When a loud noise is produced, adjust the recording level so that the level meter remains in the vicinity of [-6]. Example of conditions where the recording level has been lowered and the excess input has been adjusted 4 Press the REC s button again will begin recording. • [ ] will appear on the display. d Elapsed recording time d 24 Notes • The recording will continue even if the volume of a single file exceeds 2 GB in the linear PCM format recording (☞ P.43). 1 The file is saved every 2 GB in separate files. It will be treated as multiple files when playing back. 2 When the recording exceeds 2 GB, the number of files in the folder may exceed 200 files. The 201st file and later will not be recognized by the recorder, so check by connecting the recorder to a PC. • When an SD Card is inserted in the recorder, be sure to confirm the recording media as either [Built-in Memory] or [SD Card] so that there is no mistake (☞ P.41, P.46). • When attempting to perform operations such as rewriting the contents of an SD Card in cases where the card has been write protected, [SD Card Locked] will appear. The playback operation can be performed, but the write protection must first be turned off when overwriting the contents on the card (☞ P.18). • If you select a folder other than [A] through [E] and press the REC s button, an [Can't record in this folder] message will flash. Select a folder from [A] through [E] and start recording again.